![]() |
|
#1
|
||||
|
||||
|
http://s271.photobucket.com/albums/j...t=100_3987.flv
http://s271.photobucket.com/albums/j...t=100_3989.flv 700+ RWHP on a BONE STOCK car ![]() Stock headers, exhaust, driveline, stock EVERYTHING. Slapped on the blower, injectors, and tuned. Who knows how long it will last (ring lands suck on these pistons and 99% of times, the first thing to go), but he's been thrashing on it for a couple weeks now.
__________________
The REAL 3V slayer!!![]() ![]() LAMC's Fastest Dodge Charger (8.26 @ 85.45) - (12.95 @ 108.90) LAMC's Fastest N/A Mustang (7.64 @ 88.87) - (12.13 @ 113.36) |
|
#2
|
||||
|
||||
|
Fuckin Adam... that MFer is insane.
I want one now.
|
|
#3
|
|||
|
|||
|
LOL i saw this out at the track a few weeks ago. sick car.
__________________
2001 Mustang Cobra, Black Forged KB 2.what? Built and Tuned by ST MotorSports. 525/520 -------- 2007 Black Z06 Corsa Exhaust American Racing headers Livernois Cam and Heads. LsxR Intake Halltech KillerBee Intake Pfadt Coilovers Built and Tuned by Adam@ ST MotorSports. |
|
#4
|
||||
|
||||
|
Is that Adams car which was running 8.0 or 7.9 at the dale last time if I can recall
__________________
04 GT |
|
#5
|
||||
|
||||
|
I think with 700rwhp, he'd be a little faster than 8.0.
__________________
|
|
#6
|
|||
|
|||
|
Yea it is faster than that. I dont remember what he was running.
__________________
2001 Mustang Cobra, Black Forged KB 2.what? Built and Tuned by ST MotorSports. 525/520 -------- 2007 Black Z06 Corsa Exhaust American Racing headers Livernois Cam and Heads. LsxR Intake Halltech KillerBee Intake Pfadt Coilovers Built and Tuned by Adam@ ST MotorSports. |
|
#7
|
||||
|
||||
|
I can tell from the vids that car is much faster than 8.0s. I "think" Miz told me the car has gone really low 11s at Fontana already.
|
|
#8
|
|||
|
|||
|
That thing just sounds angry. Helluva setup he has in that Fiat Challenger.
__________________
SINERGY MOTORSPORTS 725 N Benson. St. B Upland CA 91768 888-YUR-SNRG (888-987-7674) www.sinergymotorsports.net mark@sinergymotorsports.net Parts - Installation - Fabrication - Tuning - Repair - Custom Paint - Collision Repair - Interior |
|
#9
|
||||
|
||||
|
I love FIAT.
![]() Insane beast that car.
__________________
Full Maximum Motorsports suspension, 31spline Eaton posi, 3.73 gears, JLT, Motorsport Shortys- BassanniXpipe and MagnaFlows, Mezzeire, Brembo 4 piston '00Cobra R Brakes, HID's, Carbon fiber '03 Cobra hood, 18's, and 4R70W behind 4.6 COBRA MOTOR/Stegm.ported Eaton- started it's life as a 2002 V6
|
|
#10
|
||||
|
||||
|
gt500 + KB 2.8H = 800hp....
srt8 what???.....
__________________
![]() RET and GTR FTMFW!! |
|
#11
|
||||
|
||||
|
I saw it run 8.0's and/or 7.9's
But it was a pretty bad day at the dale that time
__________________
04 GT |
|
#12
|
|||
|
|||
|
Watch out Jose, comments like that will earn you a membership into my club. The LAMC Ford nutswingers.
__________________
SINERGY MOTORSPORTS 725 N Benson. St. B Upland CA 91768 888-YUR-SNRG (888-987-7674) www.sinergymotorsports.net mark@sinergymotorsports.net Parts - Installation - Fabrication - Tuning - Repair - Custom Paint - Collision Repair - Interior |
|
#13
|
||||
|
||||
|
im just saying....i like the challenger and all, but come on now....a gt500 with a simple blower bolt on will make 800hp.....its been documented in various stang mags....
the title was misleading considering a stock gt500 will make 100hp more than the srt8...still, the challenger makes great power for only having bolted on a blower...dont wanna take away from that, but would still like everyone to know that more can be had from the gt500.
__________________
![]() RET and GTR FTMFW!! |
|
#14
|
||||
|
||||
|
Is it just me or are the challengers fucking huge
__________________
04 GT |
|
#15
|
||||
|
||||
|
its not just u.
__________________
![]() RET and GTR FTMFW!! |
|
#16
|
|||
|
|||
|
__________________
![]() Bolt ons, long tubes, sprayed, coil over>* |
|
#17
|
||||
|
||||
|
Since when a blower, injectors, and tuned considered stock???
Its just like saying Ren is building a Stock 347 that is built.
__________________
2007 Mustang GT ![]() ![]() /thread |
|
#18
|
||||
|
||||
|
Quote:
Ren (and I) is replacing every piece of the rotating assembly to create a stroker motor. The only thing stock that will still be in place will be the box it all came in (the block). This car has NOTHING else other than a blower. Is that the same to you? I mean that would be like me saying Adam's black 05 runs in the 9s in stock form even though its got a 3.4 on it and forged guts in stock configuration. Quote:
It still a good 700 rwhp option for those who, God forbid, dont like GT500s and would rather have a Challenger. Last edited by 5litrarag; 06-10-2009 at 07:52 PM. Reason: Automerged Doublepost |
|
#19
|
|||
|
|||
|
my car is stock with only bolton's, mmkay? Anyway, sick Challenger. I just wish it was a lil smaller.
__________________
342 stroker fox - sponsored by Gorilla Glue Tune complete. Kickdown secured. Driver mod in progress. "Run your car, not your mouth." |
|
#20
|
||||
|
||||
|
Kevin I completely agree with u and wasn't knockin the challenger. 700hp is damn good with only a blower.
All I was pointing out was that the thread title said 'gt500 what' but a gt500 with a simple blower swap makes more power than the challenger.
__________________
![]() RET and GTR FTMFW!! |
|
#21
|
|||
|
|||
|
one day ill be in the 700-800 hp+ on the baby shelby..
__________________
![]() ![]() 07 Shelby GT # 1218 Paxton Novi 2200SL Intercooled 456rwhp/401rwtq. |
|
#22
|
||||
|
||||
|
I'm not 100% sure, but I dont think he has been to the track with this setup. Last time, IIRC, he was just over 500rwhp. But even then, only matters what he can get down. I had 200 less rwhp and ran almost a half second quicker at the dale....
This can go back and forth w/ adding a mod to each one. A forged 440 Hemi under that blower won't be touched by any supercharged GT500. I just wanted to simply level the playing field by giving the N/A one a blower. The GT500 will always make more power w/ stock internals b/c it was designed for a blower (low comp, forged, etc) Quote:
Quote:
Quote:
Challenger Length: 197.7 in. Width: 75.7 in. Height: 57 in. Wheel Base: 116 in. Ground Clearance: 5.5 in. GT500 Length: 187.6 in. Width: 73.9 in. Height: 54.5 in. Wheel Base: 107.1 in. Ground Clearance: 5.7 in
__________________
The REAL 3V slayer!!![]() ![]() LAMC's Fastest Dodge Charger (8.26 @ 85.45) - (12.95 @ 108.90) LAMC's Fastest N/A Mustang (7.64 @ 88.87) - (12.13 @ 113.36) |
|
#23
|
||||
|
||||
|
Well I was in the neighborhood today (had to arrange things w/ Miz
) and I swung by ST to holler at Adam.... car was being loaded up on the trailer to head to Famoso drags to run tonight.It made 720 rwhp and went 6.70s @ 104 last night at the Dale. The expectation tonight is 10.4s @ 130+ mph.edit - BTW this is the fastest Challenger in the country right now.... stock motor + KB 2.8 and supporting mods @ 4600 lbs SICK. |
|
#24
|
|||
|
|||
|
__________________
![]() ![]() 07 Shelby GT # 1218 Paxton Novi 2200SL Intercooled 456rwhp/401rwtq. |
|
#25
|
|||
|
|||
|
Quote:
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 2010 GT500 Test | 1EVLPNY | Media | 13 | 06-05-2009 10:00 PM |