Lost Angels Mustang Club  

Go Back   Lost Angels Mustang Club > Tech Forums > Pushrod Power (95 and older)

Reply
 
Thread Tools
  #1  
Old 02-26-2011, 10:14 PM
MR.KNOCKOUT's Avatar
MR.KNOCKOUT MR.KNOCKOUT is offline
Registered User
 

Join Date: Jan 2011
Location: INGLEWOOD
Posts: 796
Default 87 5.0 Coupe just 315rwhp

JP Performance built this street/strip coupe to run at our local 1/8th & 1/4 mile track. This video is when it was getting dyno tuned at Powertrain Dynamics by Steve. The car put down 315rwhp and 398rwtq with only about 200 miles on the engine.
mods: GT 40 Tublar intake, GT 40 heads ported/polished by Ben Alameda, Isky custom grind cam, mac unequal length headers with matching h pipe and catback. on the ignition side resides a whole msd ignition set up and an autologic custom chip. All on a 5.0 bored over 0.30.
http://www.youtube.com/user/03CENTGT...63/ZWZASPN5pGI

1st time taking it to the track after recent dynotune. Best time of the day was a 7.9@85 mph but it was all over the track. Looks like the stock shocks cant handle the power. Lakewood Drags are coming aboard ASAP, front and rear!

5.0 Coupe vs Whippled Cobra ( vert)
8.2@84 to a 7.5@96mph

Coupe vs G35
7.9@85 mph to a 9.8 @70mph

My 60ft was a 1.60 on both runs!!!!

It was very Consistent even while being all over the track, thankgod it never got out that groove!
http://www.youtube.com/user/03CENTGT...62/ZOz5HvnP7Cc

2nd time out finally put the Lakewood Dragshocks and managed to make it run better...
7.78@88mph with a 1.60 60ft!
http://www.youtube.com/user/03CENTGT...61/tGiJIxEA1qI

Just thought id share this vid to you guys.
Reply With Quote
  #2  
Old 02-26-2011, 10:29 PM
Speedaddiktion Speedaddiktion is offline
Junior User
 

Join Date: Dec 2010
Location: Carson, CA
Posts: 91
Default

nice man is this your car?

looks like someones i know
__________________
Reply With Quote
  #3  
Old 02-27-2011, 10:43 AM
sn95prcar's Avatar
sn95prcar sn95prcar is offline
Junior User
 

Join Date: Jan 2010
Location: Los Angeles
Posts: 77
Default

NICE! Awesome budget combo!
__________________
1995 Mustang GT Bolt on Vert
1996 Mustang GT PI Swap Vert
Reply With Quote
  #4  
Old 02-27-2011, 12:05 PM
5litrarag's Avatar
5litrarag 5litrarag is offline
Bitch, I'll make ya famous!
 

Join Date: Apr 2009
Location: P-town
Posts: 4,280
Default

Autologic?

They still use that shit?


Awesome results in any case.
__________________
"Just tell the truth; don't worry about the outcome. People respect that"
95 GT Vert - 347 Stroker
IN. WIRED.

95 Cobra - Rotrex supercharged.
Back burner for now.

The original is back
http://www.socalhorsepower​.com/forums/
Reply With Quote
  #5  
Old 02-27-2011, 05:51 PM
MR.KNOCKOUT's Avatar
MR.KNOCKOUT MR.KNOCKOUT is offline
Registered User
 

Join Date: Jan 2011
Location: INGLEWOOD
Posts: 796
Default

thanks. and no its not my car.
it belongs to Julio Perez
hes out in south central la
thought id show what he builds.

not bad for a budget combo.

yup autologic lol......
Reply With Quote
  #6  
Old 02-27-2011, 06:16 PM
MR.KNOCKOUT's Avatar
MR.KNOCKOUT MR.KNOCKOUT is offline
Registered User
 

Join Date: Jan 2011
Location: INGLEWOOD
Posts: 796
Default

a few pics. car has new look but i cant find the pics of the new suspension.
these are pics of stock suspension with welds.


Reply With Quote
  #7  
Old 02-28-2011, 07:44 AM
vrt03cobra's Avatar
vrt03cobra vrt03cobra is offline
Registered User
 

Join Date: May 2009
Posts: 1,863
Default

Car looks good. When is he planning on taking it back out?
__________________
10th Anniv. TR 03 Cobra DD - Cold Air and Catback.

DSG Convertible 03 Cobra - 88mm Turbo 1014rwhp

Racers Edge Tuning
Reply With Quote
  #8  
Old 02-28-2011, 11:19 AM
RedRyder RedRyder is offline
Moderator
 

Join Date: Apr 2009
Posts: 6,662
Default

Good stuff!
__________________
Quote:
Originally Posted by lsxfox View Post
your car aint ever hitting the streets.

"Keep away from those people who try to belittle your ambitions. Small people always do that, but the really great make you feel that you, too, can become great."
-Mark Twain
Reply With Quote
  #9  
Old 02-28-2011, 04:59 PM
MR.KNOCKOUT's Avatar
MR.KNOCKOUT MR.KNOCKOUT is offline
Registered User
 

Join Date: Jan 2011
Location: INGLEWOOD
Posts: 796
Default

Quote:
Originally Posted by vrt03cobra View Post
Car looks good. When is he planning on taking it back out?
yeah. now its on h&r ss springs and bilstein shocks and struts.
as of track runs i have no idea. lol
he's only tooken it out twice to irwindale and fontana.
the first time it went to irwindale was because my older bro
drove it down the track but ill see if he takes it this thursday.

---------- Post added 02-28-2011 at 05:00 PM ----------

Quote:
Originally Posted by RedRyder View Post
Good stuff!
Yup. thanks.
Reply With Quote
  #10  
Old 02-28-2011, 08:54 PM
WhiteLX's Avatar
WhiteLX WhiteLX is offline
Registered User
 

Join Date: Apr 2009
Location: Vista, CA
Posts: 770
Default

sounds liek a pretty healthy cam. Which GT40 heads, there's like 5 different kinds.

Please, for the love of god, tell him to get a different exhaust. It sounds terrible.
__________________

1992 5.0 notch
1986 Merkur XR4Ti - It's a race car!
www.socalhorsepower.com
Reply With Quote
  #11  
Old 02-28-2011, 09:33 PM
MR.KNOCKOUT's Avatar
MR.KNOCKOUT MR.KNOCKOUT is offline
Registered User
 

Join Date: Jan 2011
Location: INGLEWOOD
Posts: 796
Default

Quote:
Originally Posted by WhiteLX View Post
sounds liek a pretty healthy cam. Which GT40 heads, there's like 5 different kinds.

Please, for the love of god, tell him to get a different exhaust. It sounds terrible.
its a great ISKY cam
they are the GT 40 CAST IRON HEADS.

it had bbk lontubes with mac offroad h pipe and mac cat back

now it has bbk l/t's with bbk catted xpipe and 3 chamber flowmasters.
now its not loud at all.
Reply With Quote
  #12  
Old 02-28-2011, 09:33 PM
Sal Sal is offline
Registered User
 

Join Date: Apr 2009
Location: Palmdale, Ca
Posts: 329
Default

Damn, I haven't spoken to Julio in years! Seems you know alot of the same folks I know. We need to get you guys out to a PSCA race!

Eric, I'm pretty sure he's using iron GT40 heads, the originals.
__________________
Sal's Speed Shop
Mustang Drag Days '01-'07
PSCA Ford Racing Mustang Maddness
www.pscaracing.com
www.fordracing.com
www.teamzmotorsports.net
www.benalamedaracing.com
www.boostpros.com
www.bdracing.net
www.adtr.net
Reply With Quote
  #13  
Old 02-28-2011, 09:36 PM
MR.KNOCKOUT's Avatar
MR.KNOCKOUT MR.KNOCKOUT is offline
Registered User
 

Join Date: Jan 2011
Location: INGLEWOOD
Posts: 796
Default

Quote:
Originally Posted by Sal View Post
Damn, I haven't spoken to Julio in years! Seems you know alot of the same folks I know. We need to get you guys out to a PSCA race!

Eric, I'm pretty sure he's using iron GT40 heads, the originals.
lol yup. Julio is still around just not racing anymore.
yes he loves to run the gt40 originals on his cars alot.
all of his cars also have the gt40 tubular intake.
Reply With Quote
  #14  
Old 02-28-2011, 09:52 PM
MR.KNOCKOUT's Avatar
MR.KNOCKOUT MR.KNOCKOUT is offline
Registered User
 

Join Date: Jan 2011
Location: INGLEWOOD
Posts: 796
Default

this is another one of Julios coupes.
i believe this one had the gt40 X aluminum heads and an X303 cam with a tubular intake aswell.
too bad the trans broke that day

Reply With Quote
  #15  
Old 02-28-2011, 10:11 PM
LBFIVEOH LBFIVEOH is offline
Registered User
 

Join Date: Dec 2010
Location: LONG BEACH,CA
Posts: 190
Default

Quote:
Originally Posted by MR.KNOCKOUT View Post
this is another one of Julios coupes.
i believe this one had the gt40 X aluminum heads and an X303 cam with a tubular intake aswell.
too bad the trans broke that day http://i112.photobucket.com/albums/n...7fee0640b3.jpg
http://i112.photobucket.com/albums/n...out_03/l-1.jpg
http://i112.photobucket.com/albums/n...45afc0b964.jpg
Who's the driver in this car??
What times??
__________________


90' notchback
1/8mile
7.30@93mph all motor!
6.91@102.8mph nitrous pass

1/4mile
11.97@114mph all motor
11.1@122mph nitrous
^^^^^^^ 5 speed^^^^^^^
Currently on a c-4 & vortech sc
New times coming soon!




Mad TQ White cobra 6.74@104.56 street tune
Reply With Quote
  #16  
Old 02-28-2011, 10:14 PM
MR.KNOCKOUT's Avatar
MR.KNOCKOUT MR.KNOCKOUT is offline
Registered User
 

Join Date: Jan 2011
Location: INGLEWOOD
Posts: 796
Default

Quote:
Originally Posted by LBFIVEOH View Post
Who's the driver in this car??
What times??
my bro ran both of Julios cars.
best time that day with the blown trans was a 8.1
before that i think the car was in the mid 7s
Reply With Quote
  #17  
Old 02-28-2011, 10:17 PM
WhiteLX's Avatar
WhiteLX WhiteLX is offline
Registered User
 

Join Date: Apr 2009
Location: Vista, CA
Posts: 770
Default

Makes me wonder what mine would have done when it was N/A with a tune and a few more tweaks. It went 7.99@86 on ET streets with the heavy 17s, no weight transfer, and no weight reduction.

Same combo now with boost and some tuning is going 7.3s@96. GT40 irons do work well.
__________________

1992 5.0 notch
1986 Merkur XR4Ti - It's a race car!
www.socalhorsepower.com
Reply With Quote
  #18  
Old 02-28-2011, 10:17 PM
LBFIVEOH LBFIVEOH is offline
Registered User
 

Join Date: Dec 2010
Location: LONG BEACH,CA
Posts: 190
Default

Quote:
Originally Posted by MR.KNOCKOUT View Post
my bro ran both of Julios cars.
best time that day with the blown trans was a 8.1
before that i think the car was in the mid 7s
Cool.. Yeah I know chino use to drive his cars back then right!!

---------- Post added 02-28-2011 at 10:20 PM ----------

Quote:
Originally Posted by WhiteLX View Post
Makes me wonder what mine would have done when it was N/A with a tune and a few more tweaks. It went 7.99@86 on ET streets with the heavy 17s, no weight transfer, and no weight reduction.

Same combo now with boost and some tuning is going 7.3s@96. GT40 irons do work well.
They do bro... My old set up ran 7.21@96mph w/ 1.53 60foot 125shot
All motor 8.0@84mph yanking the wheels
Stock bottom end no tune 93' cobra heads and intake and a custom cam
Full interior..
__________________


90' notchback
1/8mile
7.30@93mph all motor!
6.91@102.8mph nitrous pass

1/4mile
11.97@114mph all motor
11.1@122mph nitrous
^^^^^^^ 5 speed^^^^^^^
Currently on a c-4 & vortech sc
New times coming soon!




Mad TQ White cobra 6.74@104.56 street tune
Reply With Quote
  #19  
Old 02-28-2011, 10:23 PM
WhiteLX's Avatar
WhiteLX WhiteLX is offline
Registered User
 

Join Date: Apr 2009
Location: Vista, CA
Posts: 770
Default

My wheels stay on the ground, even when cutting 1.5x 60fts
__________________

1992 5.0 notch
1986 Merkur XR4Ti - It's a race car!
www.socalhorsepower.com
Reply With Quote
  #20  
Old 02-28-2011, 10:27 PM
MR.KNOCKOUT's Avatar
MR.KNOCKOUT MR.KNOCKOUT is offline
Registered User
 

Join Date: Jan 2011
Location: INGLEWOOD
Posts: 796
Default

Quote:
Originally Posted by LBFIVEOH View Post
Cool.. Yeah I know chino use to drive his cars back then right!!

---------- Post added 02-28-2011 at 10:20 PM ----------



They do bro... My old set up ran 7.21@96mph w/ 1.53 60foot 125shot
All motor 8.0@84mph yanking the wheels
Stock bottom end no tune 93' cobra heads and intake and a custom cam
Full interior..
i believe so. is he the one with the white lx? with a blower?

yup the gt40 heads work real good.

---------- Post added 02-28-2011 at 10:27 PM ----------

Quote:
Originally Posted by WhiteLX View Post
My wheels stay on the ground, even when cutting 1.5x 60fts
thats good.
Reply With Quote
  #21  
Old 02-28-2011, 10:30 PM
LBFIVEOH LBFIVEOH is offline
Registered User
 

Join Date: Dec 2010
Location: LONG BEACH,CA
Posts: 190
Default

Quote:
Originally Posted by WhiteLX View Post
My wheels stay on the ground, even when cutting 1.5x 60fts
I bet.. I had my other notch back in the days actually sane color as your car.. With MM SUSPENSION All around and it did great on the dragstrip.. Wheels never came up and that's same motor I just describeb hit the best of 8.2's on drag radials.. And 7.6 on the 100shot btw it was a tripple white notch

---------- Post added 02-28-2011 at 10:32 PM ----------

Quote:
Originally Posted by MR.KNOCKOUT View Post
i believe so. is he the one with the white lx? with a blower?

yup the gt40 heads work real good.

---------- Post added 02-28-2011 at 10:27 PM ----------



thats good.
No that's Abraham.. Chino is my buddy he used to work for jp back then..
__________________


90' notchback
1/8mile
7.30@93mph all motor!
6.91@102.8mph nitrous pass

1/4mile
11.97@114mph all motor
11.1@122mph nitrous
^^^^^^^ 5 speed^^^^^^^
Currently on a c-4 & vortech sc
New times coming soon!




Mad TQ White cobra 6.74@104.56 street tune
Reply With Quote
  #22  
Old 02-28-2011, 10:34 PM
MR.KNOCKOUT's Avatar
MR.KNOCKOUT MR.KNOCKOUT is offline
Registered User
 

Join Date: Jan 2011
Location: INGLEWOOD
Posts: 796
Default

Quote:
Originally Posted by LBFIVEOH View Post
I bet.. I had my other notch back in the days actually sane color as your car.. With MM SUSPENSION All around and it did great on the dragstrip.. Wheels never came up and that's same motor I just describeb hit the best of 8.2's on drag radials.. And 7.6 on the 100shot btw it was a tripple white notch

---------- Post added 02-28-2011 at 10:32 PM ----------


No that's Abraham.. Chino is my buddy he used to work for jp back then..
oh ok. my bad. ive met alot of people hanging out with him but im bad with names lol......hopefully i make julio bring out another one of his foxbody's this thursday
Reply With Quote
  #23  
Old 02-28-2011, 10:40 PM
LBFIVEOH LBFIVEOH is offline
Registered User
 

Join Date: Dec 2010
Location: LONG BEACH,CA
Posts: 190
Default

Quote:
Originally Posted by MR.KNOCKOUT View Post
oh ok. my bad. ive met alot of people hanging out with him but im bad with names lol......hopefully i make julio bring out another one of his foxbody's this thursday
Cool.. I'll be out there with the white cobra.. I might run my notch but I don't know yet..
__________________


90' notchback
1/8mile
7.30@93mph all motor!
6.91@102.8mph nitrous pass

1/4mile
11.97@114mph all motor
11.1@122mph nitrous
^^^^^^^ 5 speed^^^^^^^
Currently on a c-4 & vortech sc
New times coming soon!




Mad TQ White cobra 6.74@104.56 street tune
Reply With Quote
  #24  
Old 02-28-2011, 10:42 PM
MR.KNOCKOUT's Avatar
MR.KNOCKOUT MR.KNOCKOUT is offline
Registered User
 

Join Date: Jan 2011
Location: INGLEWOOD
Posts: 796
Default

Quote:
Originally Posted by LBFIVEOH View Post
Cool.. I'll be out there with the white cobra.. I might run my notch but I don't know yet..
nice. thats one fast cobra. cool. i think i have a vid of you running my bros 2v
Reply With Quote
  #25  
Old 02-28-2011, 10:43 PM
LBFIVEOH LBFIVEOH is offline
Registered User
 

Join Date: Dec 2010
Location: LONG BEACH,CA
Posts: 190
Default

Quote:
Originally Posted by WhiteLX View Post
My wheels stay on the ground, even when cutting 1.5x 60fts
Hey so u ran at Fontana a couple Months ago right! I recognized the rims and blower! Looked good man...
__________________


90' notchback
1/8mile
7.30@93mph all motor!
6.91@102.8mph nitrous pass

1/4mile
11.97@114mph all motor
11.1@122mph nitrous
^^^^^^^ 5 speed^^^^^^^
Currently on a c-4 & vortech sc
New times coming soon!




Mad TQ White cobra 6.74@104.56 street tune
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 07:26 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.