Pricing

[BISKIT]

I thought I would create a thread for some of you folks so that you can bypass having to ask me directly and just look in here for a quote on some of the more basic stuff.

On single items, the quotes stand, but if you are doing multiple things, package deals are available.

Paint and Body:
All paintjobs (unless otherwise stated) come with a full lifetime warranty against any failures in paint or clearcoat. As long as you own the vehicle, that warranty applies.

Front Bumper $340
Rear Bumper $340
Rocker moldings (pair) $330
Fender (ea.) $265
Rear Spoiler (1pc) $195
Hood (OE price) $375
Deck lid $275
Smoked Head/Tail (ea.) $65
Smoked side markers / center light (ea.) $35
Smoked rear package A
(two rear lights and center) $150.00
Smoked rear package B
(package A + side markers) $215.00
Mirrors/caps(ea): $50.00

All parts (except smoked) can be wetsanded and buffed for an additional 40.00.
Rockers can be wetsanded and buffed for 40.00 ea or 60.00 for the pair.

All parts to be removed, de-trimmed & installed seperate.
Any needed body work quoted on a case by case basis. (Hoods include 2 Labor units worth)
Pearls, Red & custom colors at additional cost.
New OEM or A/M parts or color change require underside on hoods at additional cost. ($125 ea.)
Includes PPG Envirobase HP basecoat paint.
Does not include the removal or replacement of emblems or graphics.
The above prices may not be used to negotiate pricing on collision repair jobs.
Prices subject to change


Mechanical:

Ring and pinion install:
Labor
Live Axle (pre 05): 300.00
Live Axle (05+): 300.00
IRS: 300.00
CALL FOR PACKAGE DEAL INCLUDING GEARS, REBUILD KIT, FLUIDS AND LABOR.

S197

Lowering springs: $315
Shocks and Struts: $315
If done at same time, no additional charge for doing both. (ie: 315 for BOTH shocks and springs)
Panhard Bar: $45
CAI: $45
Rear Lower Control Arms: $90
Underdrive Pulley: $90
Alignment: $84.99
Headers: CALL
Midpipe: $90
Axleback: $90
Clutch repl. $315


Sn95 (94-04)

Lowering springs $315
Shocks $315
If done at same time, no additional charge for doing both. (ie: 315 for BOTH shocks and springs)

CC plates $180
Steering rack bushings $180
Bumpsteer kit (ie: MM tapered) $67.50
Lower Control arms ea $90
(less if done when lowering)
CAI $45
Underdrive pulley (1) $90
Underdrive pulley (3) $180
Alignment $84.99
Subframe connectors (FL) $150.00
Clutch $315 (does not include resurfacing of flywheel if necessary)


The above prices may not be used to negotiate pricing on collision repair jobs.
Prices subject to change


Misc services:

AC service: 89.99 (does not include refigerant)

[Joy]

Price on upper intake powdercoating or polishing? Not sure which one I should do, but my stock one looks pretty out-of-place...

[5litrarag]

hmmm, Make me a package deal and I might have you shoot a front bumper and hood for me and I'll install them after all the goodies go in with the motor. :ninja:

[CEE1NG_RED]

Mark.
How much for IRS bumpsteer kit w/ upgraded toe-links installed? Also, while I'm upgrading the bumpsteer (front/rear) since my rear driver's toe-link freezed, might as well buy additional upgrade parts for the Terminator. PM me suggestions...

[YORCHI]

How much for cooling system flush/fill?

How much for fuel filter swap?

How much for tranny fluid swap?

How much for vehicle check?

[CEE1NG_RED]

How much for cooling system flush/fill?

How much for fuel filter swap?

How much for tranny fluid swap?

How much for vehicle check?

You can do the fuel filter yourself... :lurk: And for a compression check, there's a tool you can purchase at Harbor Freight.

X2 w/ everything else. :look:

[fdogg96]

for the fuel filter, you just jack up the car, relieve the pressure and swap it.

[96GTS]

hmmm, Make me a package deal and I might have you shoot a front bumper and hood for me and I'll install them after all the goodies go in with the motor. :ninja:
Gonna finally get the Cervini hood on??:rollin:

On the white or red car?

[fdogg96]

Gonna finally get the Cervini hood on??:rollin:

On the white or red car?

Cervini? :drool:

I really like C-500 body kit. double :drool:

[5litrarag]

Gonna finally get the Cervini hood on??:rollin:

On the white or red car?


Yes sir... New front, Cervini hood, fresh headlights, 11:1 CR, Bennett cam, finally getting its SFCs, fresh suspension parts, possibly a T56.... :look: I think I've said too much. :devil:

Oinker is gonna be a bad MFer soon. :nod:

[fdogg96]

which Cervani hood are you getting put on? got a pic?

[96GTS]

Yes sir... New front, Cervini hood, fresh headlights, 11:1 CR, Bennett cam, finally getting its SFCs, fresh suspension parts, possibly a T56.... :look: I think I've said too much. :devil:

Oinker is gonna be a bad MFer soon. :nod:
Niiice:bling:

[5litrarag]

Niiice:bling:

Yeah then I'll start on the clean up work on the red one until it craps out and I do the big stroker for that one...

but in between then I may buy a new car for the girl. I think its getting close to that time.... that Jeep I have is falling apart and I hate it anyway.

[1EVLPNY]

Yes sir... New front, Cervini hood, fresh headlights, 11:1 CR, Bennett cam, finally getting its SFCs, fresh suspension parts, possibly a T56.... :look: I think I've said too much. :devil:

Oinker is gonna be a bad MFer soon. :nod:

So that's were the headlights from the cobra are, on the Oinker. :mrgreen:

[5litrarag]

So that's were the headlights from the cobra are, on the Oinker. :mrgreen:

Not exactly... I have another set of smoked lights I bought about a year or 2 ago and never put on because I wanted to wait until everything else was ready to go on. :devil:

Cobra styled lights belong on a Cobra. ;)

[YORCHI]

You can do the fuel filter yourself... :lurk: And for a compression check, there's a tool you can purchase at Harbor Freight.

X2 w/ everything else. :look:
I can do the fuel filter myself, but if he doesn't charge me that much, I can might as well just have him knock it out while he's doing other things for my car...

and I don't need a compression check, the car runs and drives fine, the engine sounds just like it did when I first bought it, all I need is a quick check of the car so I can take care of anything I might need to before I drive my happy ass out to Sacramento

[AutoBadges]

Mark,

I have a 99-04 Cobra R hood from TruFiber, can you hook me up with a quote please?

[userob]

3.73 gears installed and one leg burner cured? Also, I want a boost gauage and an electrical fuekl sending unit and gauage install. Thanks

[1EVLPNY]

Not exactly... I have another set of smoked lights I bought about a year or 2 ago and never put on because I wanted to wait until everything else was ready to go on. :devil:

Cobra styled lights belong on a Cobra. ;)

I agree, cobra parts go on a cobra (Jeff's V6 is the exception :devil:) The Red Devil finally gets some love lol. :)

[5litrarag]

I agree, cobra parts go on a cobra (Jeff's V6 is the exception :devil:) The Red Devil finally gets some love lol. :)

Once I get the Oinker running and kickin ass again (which seems to be shaping up to be a little sooner than I expected :cool: ), I'll start on getting the red one to where I really want it.

Oinker should be ready for summer.... probably wont get a new top on it before then but during the summer most people dont even know if the top on my works because its always down. :rofl:

[1EVLPNY]

Once I get the Oinker running and kickin ass again (which seems to be shaping up to be a little sooner than I expected :cool: ), I'll start on getting the red one to where I really want it.

Oinker should be ready for summer.... probably wont get a new top on it before then but during the summer most people dont even know if the top on my works because its always down. :rofl:

:cheers: on the oinker, nothing like a fast, kick ass vert ;) And top down in the summer is FTW! :)

The red one has a lot of potential, get some nice wheels and a new paint job and appearance wise it'll be bitchin. :)

[YORCHI]

thanks alot Mark,
can't wait to stop by and finally see the new shop

I'll bring my daughter along so you can finally meet her

[fdogg96]

1) do you do body work?
if answered "yes" please answer the following questions, if answer "no" then this questionnaire has been complete.
2) do you do it on premises or send out?
3) will you work on a SHO *ahem* :look:
4) how much to fix a dent on the top corner at the rear; its right underneath the trunk and close to the tail light.
5) how much?

Thank you Bizquick

[95darkhorse]

Most prices are good...several are expensive...not bad

[BISKIT]

Most prices are good...several are expensive...not bad

Which prices do you consider expensive?

[Martini]

Mark! need a quote on paint on xenon 1/4 window scoops and Plenum cover!

[5litrarag]

Hey Mark I know this isn't the "progress" or status thread you had before, but how's it looking on those SFCs?

Think you guys can get them on by or before the date I told you?
Seeing G-Money's engine pull and some other stroker project threads over on the Corral got me motivated to get started on the Oinker again. Let me know man... I need my ass kickin' summer ride. :nod:

[BISKIT]

Mark! need a quote on paint on xenon 1/4 window scoops and Plenum cover!

Black?

[BISKIT]

Hey Mark I know this isn't the "progress" or status thread you had before, but how's it looking on those SFCs?

Think you guys can get them on by or before the date I told you?
Seeing G-Money's engine pull and some other stroker project threads over on the Corral got me motivated to get started on the Oinker again. Let me know man... I need my ass kickin' summer ride. :nod:

I am still aiming for the date we discussed (this weekend). I just need to get this 96 out of the way as I need to get yours out and Jesse's back on the rack pronto.

[5litrarag]

Cool beans mark... A few extra dollars fell into my lap so I'm stepping up the pace on all this before something or someone comes along to claim the extra funds. Hey don't forget to pull that driveshaft for me too. I'm taking that one and the cobra's to get new u joints and balancing.

[BISKIT]

Cool beans mark... A few extra dollars fell into my lap so I'm stepping up the pace on all this before something or someone comes along to claim the extra funds. Hey don't forget to pull that driveshaft for me too. I'm taking that one and the cobra's to get new u joints and balancing.

Dude just take em down the block. Inland Empire Driveline is just down the street and they KNOW THEIR SHIT.

[5litrarag]

Dude just take em down the block. Inland Empire Driveline is just down the street and they KNOW THEIR SHIT.

Do you know what they charge for a simple u-joint install and balancing?

[5litrarag]

Do you know what they charge for a simple u-joint install and balancing?

For anyone else that wants to know they charge 175 for new joints and balancing....



Mark... are we on schedule homeboy? I really would like to have the driver pick up my car saturday, possibly friday if I can swing out of work a bit early...

I made some preliminary arrangements on my end to get that thing here and start tearing it down. :batman:

[Ogbatman]

Does your clutch job price include the new clutch?

[SHOspazz92]

Paint my whole car for 2,000 Dollars. K? THX!

-Sam

[BISKIT]

Does your clutch job price include the new clutch?

No. Labor only.

[BISKIT]

Paint my whole car for 2,000 Dollars. K? THX!

-Sam

No prob.

- goes to vatozone to stock up on sandpaper, primer and rattlecans... :asthanos:

[Fords4life351]

How much to paint an entire '94-95 with factory color? Still undecided if to go with black or rio red.

[5litrarag]

Please if its a rio red keep it that way.... the world can live without ANOTHER black mustang. Please....

[BISKIT]

How much to paint an entire '94-95 with factory color? Still undecided if to go with black or rio red.

For paint jobs, especially completes it is best to discuss it once I have seen the car as there are quite a few variables.

Feel free to give me a call.

[Fords4life351]

For paint jobs, especially completes it is best to discuss it once I have seen the car as there are quite a few variables.

Feel free to give me a call.

can you give me just a ball park(i wont hold you to it :angel: ), i havent bought a car yet, i want to know what i'm looking at so that i can pay accordingly for it ;)

---------- Post added 02-13-2011 at 08:46 PM ----------

Please if its a rio red keep it that way.... the world can live without ANOTHER black mustang. Please....


i havent found one yet, but i've narrowed it down to those two color mustangs for now, number one choice is rio red for sure. as you know though they are rather hard to find. Black would be a second option, as would yellow(yes yellow :aaron: ha )

[5litrarag]

Rio Red is gonna be a little tough to find because you only have 2 yrs to choose from and there just arent a lot out there and the ones that are out there have the tan interior. And I'm sure you arent looking for that. hahaha
Anyway if you see a cobra w/ cloth that is a VERY rare one.
And while you want to buy one cheap, heres a tip from someone who's done it... dont buy a car with paint/body issues. And FYI, many of the red ones you will come across WILL have paint problems, so choose wisely.

[BISKIT]

Kevin is correct.

Red fades the fastest and as such finding a clean and good condition Rio Red car is going to be quite a feat.

Any car of those years is either going to be low mileage garage queen (high dollar) or a little rough around the edges at the least.

Not counting any bodywork, the average price for a COMPLETE same color car is about 3k and a little more for reds as the paint itself is more expensive.

Now again, I don't like to throw quotes out there without seeing the car so take that with a grain of salt as it might be more, it might be less. Really just depends on what we are working with.

[Fords4life351]

Kevin is correct.

Red fades the fastest and as such finding a clean and good condition Rio Red car is going to be quite a feat.

Any car of those years is either going to be low mileage garage queen (high dollar) or a little rough around the edges at the least.

Not counting any bodywork, the average price for a COMPLETE same color car is about 3k and a little more for reds as the paint itself is more expensive.

Now again, I don't like to throw quotes out there without seeing the car so take that with a grain of salt as it might be more, it might be less. Really just depends on what we are working with.

Ok I'll have to drive whatever car i get to you to get an actual estimate when the time comes. Thanks for the input.

[BISKIT]

Ok I'll have to drive whatever car i get to you to get an actual estimate when the time comes. Thanks for the input.

If you want, let me know about any prospective cars you are looking at buying and I will take some time out of the day and go with you. That way you know EXACTLY what you are getting yourself into.

[Blind]

I want to repaint my red car, but I think I need a new hood first :( the 4v intake is starting to crack the hood

[RedRyder]

Welcome to the pink car club. Faded red FTL.

[Blind]

only 2 spots have faded really, roof and the drivers taillight cover, the rest I want to get painted because the p/o did not know how to drive, every panel has paint damage from scraping on shit, and the back right was keyed.

looks good from far, but far from good lol