f.s. fact eaton off 04 cobra w/14k miles and acceso

[arodsvt]

eaton w/acces. has only 14k miles...have fact inject..all fac pulleys, tb,plenum,heat exchanger..blower has stock pulley with belt and pulley cover....asking $450 obo plus shipping and paypal, prefer local buyer...
http://img200.imageshack.us/img200/5530/006ziv.jpg (http://img200.imageshack.us/i/006ziv.jpg/)
http://img19.imageshack.us/img19/7856/005fjp.jpg (http://img19.imageshack.us/i/005fjp.jpg/)

[Enorbit3]

so what would i need to put this on my mach?

[BISKIT]

so what would i need to put this on my mach?

Call me dude. I have EVERYTHING additional you need listed to do this swap and we (as far as I know) are the only ones that have done this swap 4 times now.

[Enorbit3]

Call me dude. I have EVERYTHING additional you need listed to do this swap and we (as far as I know) are the only ones that have done this swap 4 times now.

can u PM me or post a ballpark figure as to how much the additional stuff is and how much to make it all work?

[Nicksbluestang]

bump for the v6 guys. :look:



:laugh:


jose you are better off getting a cenrifigul style blower that comes with everything you need instead of piecing this together. :banana:

[BondoSHO]

While it took a while, Jeff and Dave's are working just fine.

[Enorbit3]

bump for the v6 guys. :look:



:laugh:


jose you are better off getting a cenrifigul style blower that comes with everything you need instead of piecing this together. :banana:

ya but a centri blower for my car would run me at least 4k for just the parts....

[Nicksbluestang]

ya but a centri blower for my car would run me at least 4k for just the parts....

thats about hte pricwe you will edn up paying for this after you piece it all together. Do the math.
all the little pieces add up and by the time you are finished piecing it together it will run you close to 4-5 k or so.
just saying. :shrug:
your better off with an off the shell complete kit than something you have to piece together. It will save you headaches.

im just looking out for my homie. ;)

While it took a while, Jeff and Dave's are working just fine.

yeah but how long did it take jeff to have it installed on his car and running.

[arodsvt]

lmk...i take good care of my stuff, and if anything would go wrong with my things i would refund the full amount of what u paid for it with me......my cobra currently has 20k miles....and its 5years old.....but this is just some fyi....my stuff sells itself......

p.s. looking into a full swap is a good idea to see how much it would cost, do ur research.

[BISKIT]

can u PM me or post a ballpark figure as to how much the additional stuff is and how much to make it all work?

Sure thing.

The lucky thing is Jeff actually has many of the parts you will need incl a complete 04 cobra tank with pumps.
The most expensive parts are the timing cover and the crank pulley assembly which retail are about 1600-1700 from ford but with a little sniffing around on craigslist and ebay you should be able to find for significantly less.

The remaining items are mainly some hoses, a lot of misc bolts, studs, washers and hardware, alternator etc.


And Nick, please don't talk about things you don't know about. Jeff was the first time this was done (by us) and he did most of the legwork himself. His issue mainly had to do with running it all via an 02 GT computer with an auto trans and it didn't have the provisions for many of the electronics on the cobra.
David's setup took about 3 days once all the parts were in and our 3rd and 4th customers that we did it on took even less. (The last one being a whipple 3.4 01 cobra.)

The benefit to doing this conversion isn't even so much the eaton but the fact that the car will ready to accept any 03/04 supercharger if you want to tone down the compression and do a forged rotating assembly down the line which is something an "off the shelf" kit for a Mach 1 will never be able to match.

[jhwalker]

eaton w/acces. has only 14k miles...have fact inject..all fac pulleys, tb,plenum,heat exchanger..blower has stock pulley with belt and pulley cover....asking $450 obo plus shipping and paypal, prefer local buyer...
http://img200.imageshack.us/img200/5530/006ziv.jpg (http://img200.imageshack.us/i/006ziv.jpg/)
http://img19.imageshack.us/img19/7856/005fjp.jpg (http://img19.imageshack.us/i/005fjp.jpg/)

You have a pm.

[Enorbit3]

You have a pm.

welcome to the site.

[jhwalker]

I have sent several PMs but don't see them in my "pms sent" file. It may be too soon for me to pm, as I just registered a couple of minutes ago.
I am local and would be a cash buyer.

You could try to pm me and maybe a response to your pm would work...

[Enorbit3]

you prolly have to have a certain post count, like say 5 or something for the PMs to work....

maybe go introduce yourself in the n00b section and get your postcount higher....we have meets all the time, so maybe you'll join us sometime....
/hijack

bump for a blower.

[jhwalker]

you prolly have to have a certain post count, like say 5 or something for the PMs to work....

maybe go introduce yourself in the n00b section and get your postcount higher....we have meets all the time, so maybe you'll join us sometime....
/hijack

bump for a blower.

Roger that. Done. I'll post a bit, and tomorrow if the pm's still don't kick I'll let someone know.
thanks

[StriderTacticaL]

You can send PM's....they just aren't stored in your sent PM folder by default unless you select it in your account options

[1218shelby]

thats a good price jose.. you should do it..

[Enorbit3]

ya i been tossin the idea around.

[96GTS]

I like how you have 4 feet in the 2nd pic. And what's in the GS MOTORSPORTS box? :drool:

What's your loc?

[jhwalker]

You can send PM's....they just aren't stored in your sent PM folder by default unless you select it in your account options

Thanks. I found that right before hitting the sack last night.

[arodsvt]

I like how you have 4 feet in the 2nd pic. And what's in the GS MOTORSPORTS box? :drool:

What's your loc?

Ceramic brake pads i bought for my jeep srt 8 and the eibach lowering springs that i got for it too some time ago.....so the fact. parts are just laying in the boxes since i save my things....thats all......818//SFV

Thanks. I found that right before hitting the sack last night.

pm replied

[Nicksbluestang]

I am local and would be a cash buyer.
...

You make it seem like the seller would be accepting debit/credit. :laugh:

[96GTS]

You make it seem like the seller would be accepting debit/credit. :laugh:
He has cash in hand. As opposed to researching it, etc or just thinking about doing it, James will buy it.

[arodsvt]

You make it seem like the seller would be accepting debit/credit. :laugh:

I do accept cashiers checks as well...................:afro:

[Enorbit3]

yup cash is king and if james has the dough, then its all his.

[jhwalker]

You make it seem like the seller would be accepting debit/credit. :laugh:

What. No $10 down and $10 every Friday? :aaron:

[96GTS]

http://static.seekingalpha.com/uploads/2009/4/2/saupload_09_04_02b_food_stamps.jpg

[Enorbit3]

ballin!

[1218shelby]

get it jose..

[wallie40]

I did mine for about $2100, that was getting some of the parts new. It took me about 2 weeks to get it converted.

It isnt that hard at all.

here is the list from SVTP:

1.) 2R3Z-6312-BAA Crank pulley /Harmonic Balancer
2.) 2R3Z-6C254-BC Supercharger Crank drive pulley
3.) 2R3Z-8678-BA Pulley w/mount Replaces stk alt. Pulley
4.) 2R3Z-8B603-BB Pulley bridge assembly for S.C.
5.) 1L2Z-8678-AB Idler pulley,timing cover LH side
6.) 2R3Z-6D080-BC Timing cover
7.) 2R3Z-6020-AA Timing cover gasket LH side
8.) 2R3Z-6020-BA Timing cover gasket middle
9.) 2R3Z-6020-CA Timing cover gasket RH side
10.) 2R3Z-10A313-AB Upper alternator bracket
11.) 2R3Z-10153-BA Lower alternator bracket
12.) 1U2Z-14S411-TA Electrical connector (alt. to harmness )
13.) 2R3Z-6B209-AA Tensioner on timing cover
14.) 2R3Z-8260-AB Radiator hose
15.) 2R3Z-8A593-AB Radiator hose
16.) 2R3Z-8K576-AA Radiator hose
17.) 2R3Z-8286-AB Water cross over pipe
18.) F8ZZ-6881-AA Cobra oil cooler adapter
Note: Use your stock gasket from your adapter or a leak will occur
with a Cobra gasket!
19.) 2R3Z-6A642-AA Cobra Oil cooler
20. 2R3Z-9002-AA Cobra fuel tank
21.) 2R3Z-9H307-AB Cobra fuel pump
22.) 2R3Z-6F066-AA Eaton supercharger & inlet / T.B.
23.) 2R3Z-9424-BB Lower intake
24.) 2R3Z-6K775-BA Garrett factory intercooler
25.) 2R3Z-9H486-?? Intercooler to S.C. gasket
26.) 2R3Z-9A758-AA Cobra throttle cable
27.) 3U2Z-14S411-JUA IAT sensor connector
28.) 2R3Z-9H308A-?? Intercooler pipe to heat Exchanger
29.) 2R3Z-6K683A-?? “……………………………………..”
30.) 2R3Z-6K683B-?? “…………………………………….”
31.) 2R3Z-6K683C-?? “…………………………………….”
32.) 2R3Z-6K683D-?? “…………………………………….”
33.) 2R3Z-6K683E-?? “…………………………………….”
34.) 2R3Z-6K683F-?? “…………………………………….”
35.) 2R3Z-6K683G-?? “…………………………………….”
36.) 2R3Z-8501-AA Ford / Bosche water pump for intercooler
37.) 2R3Z-9L440-?? Factory heat exchanger
38.) 2R3Z-8A193-?? Heat exchanger mounting bracket
39.) 2R3Z-6C693-?? 2each bracket clamps
40.) 2R3Z-9H308C --?? Lower manifold to intercooler water adapter
41.) 2R3Z-6F089-?? EGR Valve
42.) 2R3Z- -?? EGR Tube to exhaust manifold
43.) 2R3Z- 8N500-?? Water pump intercooler bracket

*** #29-35 are intercooler lines

[96GTS]

Ceramic brake pads i bought for my jeep srt 8 and the eibach lowering springs that i got for it too some time ago.....so the fact. parts are just laying in the boxes since i save my things....thats all......818//SFV
I love the SRT8 Jeeps. Wouldn't mind adding one to the car hole. Make a new thread in the Media section with some pics of that thing lowered!:boost:

[arodsvt]

I love the SRT8 Jeeps. Wouldn't mind adding one to the car hole. Make a new thread in the Media section with some pics of that thing lowered!:boost:

Isnt this a Mustang site????????????? Wont they get made here?:asthanos:


Back on topic please ...........j/k!:boost:

http://static.seekingalpha.com/uploads/2009/4/2/saupload_09_04_02b_food_stamps.jpg


Just no Wic, please...................Im tired of cereal and milk and eggs....

[arodsvt]

walker is all buisness...........sold, sign, sealed, and almost delieverd...more like picked up:boost:

[jhwalker]

walker is all buisness...........sold, sign, sealed, and almost delieverd...more like picked up:boost:

Excellent to meet you. Your car sounds great.

I will post up some pics when the Eaton is adding value to a vehicle.

Thanks (and thanks for the help starting my 99+ K mile Expedition. )
JW

[BISKIT]

I did mine for about $2100, that was getting some of the parts new. It took me about 2 weeks to get it converted.

It isnt that hard at all.

here is the list from SVTP:

1.) 2R3Z-6312-BAA Crank pulley /Harmonic Balancer
2.) 2R3Z-6C254-BC Supercharger Crank drive pulley
3.) 2R3Z-8678-BA Pulley w/mount Replaces stk alt. Pulley
4.) 2R3Z-8B603-BB Pulley bridge assembly for S.C.
5.) 1L2Z-8678-AB Idler pulley,timing cover LH side
6.) 2R3Z-6D080-BC Timing cover
7.) 2R3Z-6020-AA Timing cover gasket LH side
8.) 2R3Z-6020-BA Timing cover gasket middle
9.) 2R3Z-6020-CA Timing cover gasket RH side
10.) 2R3Z-10A313-AB Upper alternator bracket
11.) 2R3Z-10153-BA Lower alternator bracket
12.) 1U2Z-14S411-TA Electrical connector (alt. to harmness )
13.) 2R3Z-6B209-AA Tensioner on timing cover
14.) 2R3Z-8260-AB Radiator hose
15.) 2R3Z-8A593-AB Radiator hose
16.) 2R3Z-8K576-AA Radiator hose
17.) 2R3Z-8286-AB Water cross over pipe
18.) F8ZZ-6881-AA Cobra oil cooler adapter
Note: Use your stock gasket from your adapter or a leak will occur
with a Cobra gasket!
19.) 2R3Z-6A642-AA Cobra Oil cooler
20. 2R3Z-9002-AA Cobra fuel tank
21.) 2R3Z-9H307-AB Cobra fuel pump
22.) 2R3Z-6F066-AA Eaton supercharger & inlet / T.B.
23.) 2R3Z-9424-BB Lower intake
24.) 2R3Z-6K775-BA Garrett factory intercooler
25.) 2R3Z-9H486-?? Intercooler to S.C. gasket
26.) 2R3Z-9A758-AA Cobra throttle cable
27.) 3U2Z-14S411-JUA IAT sensor connector
28.) 2R3Z-9H308A-?? Intercooler pipe to heat Exchanger
29.) 2R3Z-6K683A-?? ???????????????..?
30.) 2R3Z-6K683B-?? ???????????????.?
31.) 2R3Z-6K683C-?? ???????????????.?
32.) 2R3Z-6K683D-?? ???????????????.?
33.) 2R3Z-6K683E-?? ???????????????.?
34.) 2R3Z-6K683F-?? ???????????????.?
35.) 2R3Z-6K683G-?? ???????????????.?
36.) 2R3Z-8501-AA Ford / Bosche water pump for intercooler
37.) 2R3Z-9L440-?? Factory heat exchanger
38.) 2R3Z-8A193-?? Heat exchanger mounting bracket
39.) 2R3Z-6C693-?? 2each bracket clamps
40.) 2R3Z-9H308C --?? Lower manifold to intercooler water adapter
41.) 2R3Z-6F089-?? EGR Valve
42.) 2R3Z- -?? EGR Tube to exhaust manifold
43.) 2R3Z- 8N500-?? Water pump intercooler bracket

*** #29-35 are intercooler lines


That's a nice list but unfortunately a list that two of my customers banked on in doing their eaton swaps and realized (just as we did in the beginning) that it is far from the complete list.

Oh, and as far as price goes, you better be good at ebay hunting as just 3 of the parts on that list are close to 2600.00 from Ford. (and I aint even talking about the blower)

[OttoCobra]

Woot ....!!!

This thread brings back some memories !! :claw::woot2::woohoo::wall: :leet::ohshit:

:lolwut:

[96GTS]

Isnt this a Mustang site????????????? Wont they get made here?:asthanos:
Screw 'em!:angel:

[Enorbit3]

Ibtl!!!!!

:lastmofos:

[RedRyder]

negatron. grats to the seller and buyer.

[arodsvt]

Excellent to meet you. Your car sounds great.

I will post up some pics when the Eaton is adding value to a vehicle.

Thanks (and thanks for the help starting my 99+ K mile Expedition. )
JW


The Battery im selling helped Walker jump his xtra large suv, no problem, nice meeting you and keep us postd, k..........:banana2:

[V3NOM3S]

Item sold & thread closed.