WTB: Panhard Bar & Tires 93 Cobra

[gordito1972]

I'm looking for MM panhard bar for my 93; used is ok as long as all the hardware is included...

Also I'm currently running 245/45/17 all the way around and I'm looking to get some nicer tires: BFG KDW are the ones I'm looking into...

Any advice on tire sizes, where to get a good deal, or anyone selling any?

I was thinking of going with 255/40 in the front and 275/40 for the rears; any advice on looks and possible rubbing???

Any advice would be appreciated...

[Ogbatman]

Im selling a PHB brand new for $300.

[RedRyder]

Mason (ogbatman) has an MM panhard bar for sale. Hit him up.

A 275 series tire looks good on a 9-10 inch wide wheel. Looks like booty on an 8 inch wide wheel. Depending on how low your fox is, you may have to roll your fenders. I only had rubbing on the inside fenderwall. I had to trim and roll some of the liner with a hammer.

[gordito1972]

@ ogbatman I"ll send you a PM later today...

@ redryder i have an 8.5 wheel; should i go 255 all the way around?

If anyone has pics of thier different size tires shoot them to me or post them please...

[RedRyder]

I would go with 255 all around. The nitto NT05 is another great tire offered in that size.

Justtires.com

[gordito1972]

I found a 1.5 cervini cowl!!! Brand new got a good deal!


@ ogbatman hit me up i'm still interested in the MM panhard...

[grouchy01]

@ ogbatman I"ll send you a PM later today...

@ redryder i have an 8.5 wheel; should i go 255 all the way around?

If anyone has pics of thier different size tires shoot them to me or post them please...

dont take advice from ren :look:

[gordito1972]

So 275 in the rear???

[RedRyder]

I will post pics tomorrow. Trust me 275's will bulge too much on your wheels. It will look like dookie.

[gordito1972]

Ok how wide is ur wheel?

[RedRyder]

My wheel is 10 inches wide. I have nittos which run a lil narrow. A 315 nitto or other brand 275 would fit perfect for me.

[LBFIVEOH]

I was running all maximum suspension on my old notch.. Including the penhard bar. I fitted 275/40/17 in the back 255/40/17 front it was perfect oh and btw it was on a 17-8 rim..

[MR.KNOCKOUT]

the convertible foxbody has 275's in the rear on a 17x8 wheel
sorry for the crappy pic ill post dyno vid to get a better view.
http://i112.photobucket.com/albums/n188/knockout_03/will.jpg

[Ogbatman]

I found a 1.5 cervini cowl!!! Brand new got a good deal!


@ ogbatman hit me up i'm still interested in the MM panhard...

Got ur pm sorry having phone issues.:angry2:

[gordito1972]

So do you still have it and do you still want to sell it?

email me if you want eespinoza@ducommun.com or PM me; I'm going to be off tomorrow so i can meet up with you then...

[Ogbatman]

So do you still have it and do you still want to sell it?

email me if you want eespinoza@ducommun.com or PM me; I'm going to be off tomorrow so i can meet up with you then...

Yeah I still want to sell it. Just have to make some arrangements over at Sinergy to pick up the part cuz thats where its located. Sorry for the delay.

[Blind]

275's on a 17x9 wheel, shitty nitto nt555 tires.

http://i40.photobucket.com/albums/e237/blindbatts/mustang/17x9s-afterLarge.jpg

245's on a 17x8 up front

bridgestone potenza re11, kumho XS, dunlop star spec, hankook rs3, nitto nt-05 is the tires I would look at buying today, but I like sticky rubber because I like to hit the track with turns pretty often ;)

[gordito1972]

Looks good! i just got my tires installed today i'll post some pics later...

@ ogbatman I can pick it up if you are ok with that or i can meet u there? I am short on time so the sooner i can get it the better... The car is actually at RET now so they can install tomorrow if i get it tonight or tomorrow morning.

[Ogbatman]

Oh ok. Let me see what I can do.

[MR.KNOCKOUT]

what size of tires did you go with

[gordito1972]

I went with 255/40's in the front and 275/40's in the rear on 8.5 wide wheels all the way around; i like how it looks. Looks clean; just need to install the panhard and get my 1.5" Cervini painted...

Got my inner tie rod changed today and alignment...

I'll post pics this weekend if i can.

Bad news is its leaking a little; looks like the rear seal :(

[MR.KNOCKOUT]

nice perfect set up.
just reseal it lol