Someone coming out of retirement...

[Greg@RET]

Ed from Eds Speed Shop AKA silverpoison has been busy over the last year. Between getting married, having a kid, and starting a business he decided to turn the street car up some... it will still be street driven, but more track oriented.

http://i123.photobucket.com/albums/o289/GregRET/New%20RET%20Shop/TTbuilds012.jpg

I starting pulling things apart and decided to take a before shot... everything is coming out of the engine bay for the new stuff. We will also coat the timing cover....
http://i123.photobucket.com/albums/o289/GregRET/New%20RET%20Shop/TTbuilds018.jpg

[Blind]

new stuff is what, single turbo?

[LXS]

I've always LOVED the way his car looked, can't wait to see how wicked she's gonna be when you're done Greg! :drool: :cheers: :gears:

[Killer281Saleen]

Lots of things will be change but only thing I remember is th400 lol it's staying tt.. He tld me all the stuff but I forgot lol

[Greg@RET]

http://i123.photobucket.com/albums/o289/GregRET/New%20RET%20Shop/TTbuilds025.jpg

Someone asked me why pull the motor out... there is a few reasons. One is to run the BS3 we need to install lockouts. The turbo and downpipes are in the way of the valve covers. Another reason is he wants the timing cover coated, and possibly the valve covers. The last thing is he wants the engine very clean, so I was to start from zero.

BTW his twin 57mm Garrett turbos are for sale. $1k for both of them...
http://i123.photobucket.com/albums/o289/GregRET/New%20RET%20Shop/TTbuilds019.jpg

[RedRyder]

hmmm... one of those 57mm would be bad ass in the wife's civic.

[Greg@RET]

Ed said he is trying to register back on this site again but it doesn't show any image in the image verification area?

[Blind]

Ed said he is trying to register back on this site again but it doesn't show any image in the image verification area?
try a different browser.

[Greg@RET]

I will let him know.

[Greg@RET]

He said he tried that and same thing.... no worky....

[CEE1NG_RED]

...how much for piping and such to make this work on a Terminator Greg?? $1k sounds tempting. :aaron:

[vrt03cobra]

Seen his car the other day you left, he's going all out isnt he?

[Greg@RET]

...how much for piping and such to make this work on a Terminator Greg?? $1k sounds tempting. :aaron:

You could sell your Eaton set up and probably only come out of pocket a couple grand.

Seen his car the other day you left, he's going all out isnt he?

Not all out... but it will be faster. He wants to get the heads ported but I told him just to leave the longblock alone until it blows... then build a big motor.

BTW he still cant register here lol

[grouchy01]

BTW he still cant register here lol

maybe you can register for him and just have him change his account info when he gets on :whoknows:

[vrt03cobra]

.

Not all out... but it will be faster. He wants to get the heads ported but I told him just to leave the longblock alone until it blows... then build a big motor.

BTW he still cant register here lol

Nice, I'm with you on that one. Just leave the motor alone and add more boost :D It'll speed up the process on the big motor build

[Greg@RET]

maybe you can register for him and just have him change his account info when he gets on :whoknows:

I tried that and see what he is talking about now. There is no image in the image area? Maybe lamc isn't taking people right now lol

[Greg@RET]

Since he cant register here I will post this for him. We are changing things up some... Complete 3v longblock, sealed with freashly powder coated black valve covers, and black timing cover $3500! This is a built shortblock (aluminum), stock heads and cams, cams are not locked out. If you want just pay for the lockouts and installation would be no charge. This is from oil pan up, slap a intake on and its ready to go. I think this motor has about 10k mi on it, I will find out for sure.

JPC intake coated silver $800

THP twin turbo kit with twin 57mm turbos cold side is polished. Hot side was just picked up from the coaters and is black. $6000

Selling everything to change things up :asthanos:

Any questions or pictures email ed@edsspeedshop.net

[Greg@RET]

So keeping the 3V since nobody wants it. This will go in now :asthanos:

http://i123.photobucket.com/albums/o289/GregRET/New%20RET%20Shop/IMG_20101208_110619.jpg

[Greg@RET]

Getting interesting....

http://i123.photobucket.com/albums/o289/GregRET/New%20RET%20Shop/IMG_20101216_120645.jpg

http://i123.photobucket.com/albums/o289/GregRET/New%20RET%20Shop/IMG_20101216_120632.jpg

[Silverpoison]

Thanks for the pictures Greg.

[Silverpoison]

I heard my Big Stuff 3 is getting wired up on Monday :D Everything is back from the coaters, put the motor back in now!

[Greg@RET]

I heard my Big Stuff 3 is getting wired up on Monday :D Everything is back from the coaters, put the motor back in now!

:asthanos:

[Silverpoison]

The list of new mods for the car is

BIG STUFF 3 Engine Management System, with 2 and 3 Step
TH400 Transmission with upgraded input shaft
Continental Torque Converter
Manual Brakes
Manual Rack
Strange built 8.8 rear end with spool with 3.27 Gears
JPC Intake manifold modified in house to accept the Accufab Single Blade T/B and LS Coils.

All Parts by Ed's Speed Shop and Work and Tuning by Racers Edge Tuning.


I guess Ret will have the fastest 4v's and 3v's in town..... am I right?

[Greg@RET]

I'm telling Chevykiller your going after him:D

[t76mach]

I guess Ret will have the fastest 4v's and 3v's in town..... am I right?

MMR has Cali down...I don't think anyone will ever take that from them.

[Silverpoison]

MMR has Cali down...I don't think anyone will ever take that from them.



:backpedal:

[Nicksbluestang]

MMR has Cali down...I don't think anyone will ever take that from them.

Just you wait. Silverpoisons car has always been serious business and he knows how to drive. s. If i remember correctly he ran a mid 6 in the 1/8 mile with the smallest kb for a 3v

[Silverpoison]

Thanks Nick, and yes you are correct. Couple pics Greg took for me today, if I took them the quality would be better :D

http://i123.photobucket.com/albums/o289/GregRET/IMG_20101221_122143.jpg

A real engine harness
http://i123.photobucket.com/albums/o289/GregRET/IMG_20101221_122201.jpg

[Greg@RET]

Get me those lockouts tomorrow and we can get your motor in the car. The headers were put on today also...

[Silverpoison]

My motor will be dropped in tomorrow, everything is the same just cleaned up.

http://i123.photobucket.com/albums/o289/GregRET/IMG_20101222_193637.jpg

http://i123.photobucket.com/albums/o289/GregRET/IMG_20101222_193657.jpg

http://i123.photobucket.com/albums/o289/GregRET/IMG_20101222_193819.jpg

Shot of the fuel cell, still needs to be mounted
http://i123.photobucket.com/albums/o289/GregRET/IMG_20101222_120918.jpg

Trans cooler
http://i123.photobucket.com/albums/o289/GregRET/IMG_20101222_120934.jpg

Thanks Greg for letting me use your photobucket. Mine show pics small for some reason.

---------- Post added 12-22-2010 at 07:47 PM ----------

http://i123.photobucket.com/albums/o289/GregRET/PART951293075618945.jpg

[RATFINKGT]

Whats ur real name silverpoison?

[Greg@RET]

Whats ur real name silverpoison?

Ed or dude. :D

[RATFINKGT]

Okay kool i thought it was thabks.. Dude like in the movie the big lebowski? :look:

[Greg@RET]

Okay kool i thought it was thabks.. Dude like in the movie the big lebowski? :look:

Never seen it.

[RATFINKGT]

:no: john goodman as a psycho vietnam vet and best friend. Pretty funny

[Silverpoison]

Ed or dude. :D

lol.....

[Silverpoison]

The converter was ordered today, there is a couple of other things comming already, the motors is the same, we just changed to a melling oil pump with billet gears (4V), some of you may ask why a 4v oil pump, the reason is because the big stuff 3 requires the cams to be locked, the 3v comes with VCT and the oil pump for that set up makes a lot of oil pressure to operate the VCT, now that the lockouts are in the $V oil pump is perfect, plus there is no oil pump with billet gears for the 3v..... We are assuming the car will be is the very low 9 Sec zone, who knows maybe i'll hit a 8s ET, for now we are keeping the 57 mm turbos and the car went on a lil diet to achieve thae goal..

this car will still be driven on the street ocasionally and will retain the power window, power locks, radio...etc....

[kingeaton]

What about the Trans and flexplate?

[Greg@RET]

I need a trans!!

http://i123.photobucket.com/albums/o289/GregRET/IMG_20101223_104228.jpg

http://i123.photobucket.com/albums/o289/GregRET/IMG_20101223_101445.jpg

[ka0tyk]

damn that pic out of the car looks SOOO wide. im surprised it fit between the fenders.

[Silverpoison]

I need a trans!!

http://i123.photobucket.com/albums/o289/GregRET/IMG_20101223_104228.jpg

http://i123.photobucket.com/albums/o289/GregRET/IMG_20101223_101445.jpg

lol....Trans is Ready, the converter was ordered...... $1250 converter with a steel stator.....good for 1500 rwhp.... getting ready for the '67 mm turbos....lol


Damm all this little things are taking my money away............:beer2:

[Silverpoison]

Here some updates, IDK why my photobucket account displays the pics so small.....

http://i48.photobucket.com/albums/f204/MELGARFARM/IMG951492.jpg

http://i48.photobucket.com/albums/f204/MELGARFARM/IMG951494.jpg

http://i48.photobucket.com/albums/f204/MELGARFARM/IMG951495.jpg

http://i48.photobucket.com/albums/f204/MELGARFARM/IMG_1496.jpg

[Ogbatman]

Those valve covers r sick. I may want to order those for the bullitt

[Greg@RET]

Those valve covers r sick. I may want to order those for the bullitt

Can drop them off at the coaters if you want, let us know. I have to go pick up my piping from there.

You know I like it Ed. Should get the fuel system in the engine bay plumbed today.

[Greg@RET]

Getting closer.....

http://i123.photobucket.com/albums/o289/GregRET/IMG_20101228_185229.jpg

http://i123.photobucket.com/albums/o289/GregRET/IMG_20101229_175752.jpg

http://i123.photobucket.com/albums/o289/GregRET/IMG_20101229_175804.jpg

[5litrarag]

thats some serious hardware....

[Greg@RET]

Thought we could just work off the existing feed/return lines I put in about 2 yrs ago.... the lines are getting replaced since they are dried out.

[kingeaton]

Ttt

[Greg@RET]

This car started today for the first time in a while.... Now time to clean things up and get it to a track.

[t76mach]

Nice!

How long was it down?
Any videos of it running please :)

[Evil Homer]

AWESOME
I would like to see "THE DUDEMOBILE"
at the track :angel:

[Greg@RET]

Trying to see if we can make it out next Thurs... still need a shifter to arrive and all the interior.

YouTube - ‪Silverpoison‬‏

[Silverpoison]

I heard there is a mach1 wanting to line up :)

[Greg@RET]

:backpedal: HAHAHAHHAHA

[t76mach]

I heard there is a mach1 wanting to line up :)

I'm down, I know I'll lose, it isn't as fast as yours will be. :)

[LBFIVEOH]

Ohhhhhhh shit....!!!!!! A 3valve calling u out t76mach????
DE GUEVOS..

[Greg@RET]

Ed said his shifter won't be here until wends...... Weak. If he doesnt go we will take bc twin turbo bullitt out.

I want my car back! Lol

[t76mach]

Ed said his shifter won't be here until wends...... Weak. If he doesnt go we will take bc twin turbo bullitt out.

I want my car back! Lol

Aren't you getting it painted? What you go with?

Wensday is still enough time to make it out Thursday :)

[Greg@RET]

Yeah mines at the paint shop...

[vrt03cobra]

Trying to see if we can make it out next Thurs... still need a shifter to arrive and all the interior.

YouTube - ‪Silverpoison‬‏ (http://www.youtube.com/watch?v=xcnM-veTnJ4)

Looks Good Ed... time to take it out!!!!

I heard there is a mach1 wanting to line up :)

:backpedal: HAHAHAHHAHA

Ohhhhhhh shit....!!!!!! A 3valve calling u out t76mach????
DE GUEVOS..

OOH SNAP !! lol I just got back in town late last night :D :D

[06silverbullet]

oh boy if only i had thursday off :(

[Greg@RET]

So we wont make it out with this one, but we will be there with BC Twin Turbo Bullitt.

The shifter is in, just need to find a belt that fits along with some other little misc. things. Here is a quick vid of some 2 step tuning...

YouTube - ‪2 step tune up on Silverpoison‬‏

[vrt03cobra]

Looks Good... I might go and watch this Thursday... might :D

[t76mach]

So did twin bullit go?

[Greg@RET]

Yes took the customer bullitt out, ran 5.7@133.

The black tt cobra we built ran a 7.4@108 and had problems getting it in second. The mad tq cobra ran a 6.7@104, my old lightning ran a 7.4@92, lbfiveoh got tossed for no cage 6.9@102, stangfreak kb stock motor 2v ran 7.0@98 all night, and Dave's mach1 ran mid 7's.

Silverpoison is just about ready and will be doing some testing this Thursday. Shooting for mid 6's first time out.

[vrt03cobra]

Yes took the customer bullitt out, ran 5.7@133.

The black tt cobra we built ran a 7.4@108 and had problems getting it in second. The mad tq cobra ran a 6.7@104, my old lightning ran a 7.4@92, lbfiveoh got tossed for no cage 6.9@102, stangfreak kb stock motor 2v ran 7.0@98 all night, and Dave's mach1 ran mid 7's.

Silverpoison is just about ready and will be doing some testing this Thursday. Shooting for mid 6's first time out.

Word ! :afro:

[5litrarag]

Damn, that was an answer..... hahaha





And your runs what? :laugh:

[t76mach]

Damn, that was an answer..... hahaha





And your runs what? :laugh:

before I re did my hot side? 9.75@143 full weight at 18lbs of boost and full exhaust then broke the d/s (I went cheap :/) my car was taking a long time to build boost off the brake, I had a 2 second r/t so I hooked up the two step and redoing the hotside hoping to fix the issue..

Right now 0... Lol I'm gonna drop it off to get it redone at the shop (hotside and d/s), then retuning again lol probably gonna up the boost to 25 but keep it at 22 for first and second gear, car is gutted now to and has an open down pipe no more mufflers.


Btw sick ret was strong this Thursday :)

[Silverpoison]

I would really like to see a video of your run. This is like me saying I ran a 4.80@143 last night.

[vrt03cobra]

before I re did my hot side? 9.75@143 full weight at 18lbs of boost and full exhaust then broke the d/s (I went cheap :/) my car was taking a long time to build boost off the brake, I had a 2 second r/t so I hooked up the two step and redoing the hotside hoping to fix the issue..

Right now 0... Lol I'm gonna drop it off to get it redone at the shop (hotside and d/s), then retuning again lol probably gonna up the boost to 25 but keep it at 22 for first and second gear, car is gutted now to and has an open down pipe no more mufflers.


Btw sick ret was strong this Thursday :)

Let me see ... do you have a timeslip or Video of that Pass??

[t76mach]

Let me see ... do you have a timeslip or Video of that Pass??

I have a time slip... And video..

I ain't posting it cause I'm still suppose to race you member :p so you choose if you want to believe it or not..


Just bring at least 2k with you when we race :)

[vrt03cobra]

I have a time slip... And video..

I ain't posting it cause I'm still suppose to race you member :p so you choose if you want to believe it or not..


Just bring at least 2k with you when we race :)

:rofl: You're such a dumbass... what difference would it make if you already claimed you're running that time???

Either way back on topic... (Lame Ass)

[Greg@RET]

Oh boy... Lol

[5litrarag]

Exactly how I pictured this conversation going.... :laugh:


hilarious. Good work Greg.

[99cobra09]

haha LOL!!
BTW good day at the track last night!

[t76mach]

Talking about racing, did you ever run the westside cobra a couple years back? I know he wanted to run you but dunno if it ever went down.

[Greg@RET]

If your talking to me, no. I have video going 8.2, he has video going 8.5, and you have video of your car idling lol I had to do it. :angel:

[BondoSHO]

If your talking to me, no. I have video going 8.2, he has video going 8.5, and you have video of your car idling lol I had to do it. :angel:

Quoting the great Mr. Biggs; "BAMB! SMACK!"

:laugh:

[t76mach]

If your talking to me, no. I have video going 8.2, he has video going 8.5, and you have video of your car idling lol I had to do it. :angel:

Back in 09 you where not going 8.2s...

You bitched out, sorry I had to do it :/



YouTube - ‪westside fast cobra‬‏

[vrt03cobra]

Back in 09 you where not going 8.2s...

You bitched out, sorry I had to do it :/



YouTube - ‪westside fast cobra‬‏ (http://www.youtube.com/watch?v=8UiXf7dn6A4&feature=youtube_gdata_player)

And this is coming from someone that just makes up his times? :backpedal: :backpedal: :backpedal: :backpedal: :backpedal: :backpedal:

Instead of posting a video of Israel's car post yours and I'm not talking about a video of the car just Idleing or you just sitting in the drivers seat...

[Greg@RET]

Back in 09 you where not going 8.2s...

You bitched out, sorry I had to do it :/



YouTube - ‪westside fast cobra‬‏ (http://www.youtube.com/watch?v=8UiXf7dn6A4&feature=youtube_gdata_player)

Your right I was going 8.6 then, I have a good video I can dig up of that one and we were pitting together that day.

[Greg@RET]

Yet again honesty at its finest! :D That day I only made that run since I had to help Chevykiller.

http://www.streetfire.net/video/turbo-mustangs-at-psca-ca-speedway-31210_741080.htm

[vrt03cobra]

Yet again honesty at its finest! :D That day I only made that run since I had to help Chevykiller.

http://www.streetfire.net/video/turbo-mustangs-at-psca-ca-speedway-31210_741080.htm

Lets see what Mr. Pedals says next.... :backpedal: :backpedal: :backpedal:

[Greg@RET]

Let's just keep it on topic..... Ed what's the status? :D

[5litrarag]

S
M
A
C
K
!


:rofl:

[t76mach]

Your right I was going 8.6 then, I have a good video I can dig up of that one and we were pitting together that day.

So a two turbo car vs a single turbo car and both are just as fast Hmmmm.....

So when is Ed gonna finish his ride

Twin ret vs single turbo Mach :/ I know his gonna be faster but you never know history might repeat itself :)

[Greg@RET]

Wow man.... Find out what a 91mm flows and what 2 67mm flows and get back to me. If I wasn't so deep in it already I would just run a single myself. But I originally drove this car on the street so did a tt. But last time I checked I ran a 8.2@170 with a 1.4 60' and banging the limiter at 8k rpms. I would say there is more left.

Stop trying to change this thread, it would still be on topic if you would stop making times up.

[BISKIT]

I was gonna say. Big single is great for making big power but with the lag that comes with it it is not a very street friendly setup. For the purposes of Greg/Mark/Israel where they are solely drag cars and have no intent of being streetable, that is the way to go. Makes sense that if Greg has already based his setup on twins, might as well shoot for the moon with that setup.

Twins are good as you can run two smaller size turbos and get rid of some if not most of the lag but you are limited by simple airflow as to how much it can actually produce.

But again, back to topic.

[vrt03cobra]

So a two turbo car vs a single turbo car and both are just as fast Hmmmm.....

So when is Ed gonna finish his ride

Twin ret vs single turbo Mach :/ I know his gonna be faster but you never know history might repeat itself :)

Wow man.... Find out what a 91mm flows and what 2 67mm flows and get back to me. If I wasn't so deep in it already I would just run a single myself. But I originally drove this car on the street so did a tt. But last time I checked I ran a 8.2@170 with a 1.4 60' and banging the limiter at 8k rpms. I would say there is more left.

Stop trying to change this thread, it would still be on topic if you would stop making times up.

I was gonna say. Big single is great for making big power but with the lag that comes with it it is not a very street friendly setup. For the purposes of Greg/Mark/Israel where they are solely drag cars and have no intent of being streetable, that is the way to go. Makes sense that if Greg has already based his setup on twins, might as well shoot for the moon with that setup.

Twins are good as you can run two smaller size turbos and get rid of some if not most of the lag but you are limited by simple airflow as to how much it can actually produce.

But again, back to topic.

Guys it's to show you with that ignorant comment by T76 obviously he doesn't know anything about what he's talking about.

Ed can't wait till you get your car out and whoop on this sorry Fool... (But get in Line cause I'm first :D )

[RATFINKGT]

:popcorn: :punch:

[BISKIT]

Guys it's to show you with that ignorant comment by T76 obviously he doesn't know anything about what he's talking about.

Ed can't wait till you get your car out and whoop on this sorry Fool... (But get in Line cause I'm first :D )

I really don't care as I have no dog in the fight, but I do find it comical that this saga has gone on as long as it has without a single timeslip/dynosheet/race.

[Greg@RET]

this saga has gone on as long as it has without a single timeslip/dynosheet/race.

Exactly lol

I went by the shop today and Ed was putting in some fancy gauge to work with the stock cluster. Looks pretty good.

[Silverpoison]

Greg I will take some pics and use your Photobucket. My pics show amall.

[t76mach]

Guys it's to show you with that ignorant comment by T76 obviously he doesn't know anything about what he's talking about.


Lol I really hope silverpoisin can put bus lengths on me... Cause if not then what does that say about ret?


My car is built in my back yard
I'm running a single turbo eBay kit
I'm running the stock ecu
I'm running a 26" tire
Stock intake


He has twin turbos
Built by ret
Running big stuff 3 stand alone
Probably gonna run a 28x10.5 tire
Aftermarket intake

Enough talk let's get both cars put back together and line them up.

I expect to lose but for rets sake I hope it's no by a car length or two in the 1/4 :)

[blackGTny]

http://blackjeezus.files.wordpress.com/2010/11/homer-facepalm.jpg

[RATFINKGT]

Fuck it set up a date n ill b there i wana see this in person

[Silverpoison]

There is still hope for this thread. Here is some shots of my daily driven almost full weight street car.

http://i123.photobucket.com/albums/o289/GregRET/IMAG0071.jpg

http://i123.photobucket.com/albums/o289/GregRET/IMAG0076-1.jpg

http://i123.photobucket.com/albums/o289/GregRET/IMAG0077-1.jpg

http://i123.photobucket.com/albums/o289/GregRET/IMAG0078-1.jpg

http://i123.photobucket.com/albums/o289/GregRET/IMAG0079-1.jpg

---------- Post added 06-04-2011 at 07:00 PM ----------

Interior shots, passenger seat out for the track. I am missing a couple interior pieces I have to find. Stereo is fully functional.

http://i123.photobucket.com/albums/o289/GregRET/IMAG0074-2.jpg

http://i123.photobucket.com/albums/o289/GregRET/IMAG0080-1.jpg

http://i123.photobucket.com/albums/o289/GregRET/IMAG0081-1.jpg

http://i123.photobucket.com/albums/o289/GregRET/IMAG0082-1.jpg

[MR.KNOCKOUT]

looks real good!!!
if im not mistaken i saw your car in bell gardens sometime last year...

[BondoSHO]

Lol I really hope silverpoisin can put bus lengths on me... Cause if not then what does that say about ret?


My car is built in my back yard
I'm running a single turbo eBay kit
I'm running the stock ecu
I'm running a 26" tire
Stock intake
Has never seen a track

He has twin turbos
Built by ret
Running big stuff 3 stand alone
Probably gonna run a 28x10.5 tire
Aftermarket intake
Has proven times

Enough talk let's get both cars put back together and line them up.

I expect to lose but for rets sake I hope it's no by a car length or two in the 1/4 :)

Fix.T

[Greg@RET]

Car looks mean!!

[vrt03cobra]

Yo Ed!!! car looks sick bro!!

[5litrarag]

Simple and clean... I like it.

[kingeaton]

Looking good!

[Silverpoison]

Yo Ed!!! car looks sick bro!!


Thanks Bro!

---------- Post added 06-04-2011 at 09:05 PM ----------

looks real good!!!
if im not mistaken i saw your car in bell gardens sometime last year...

Lol, Yeah I drove it there to a mustang meet!

---------- Post added 06-04-2011 at 09:05 PM ----------

Simple and clean... I like it.

Thanks, Now if I could find a damm steering wheel witha a quick release that works with a 05 and up, I dont know crap about steering wheels.

[Greg@RET]

http://www.americanmuscle.com/mustang-steering-wheels.html


Quick video I put together....
YouTube - ‪Silverpoison TT Built By RET‬‏

[MR.KNOCKOUT]

Thanks Bro!

---------- Post added 06-04-2011 at 09:05 PM ----------



Lol, Yeah I drove it there to a mustang meet!

---------- Post added 06-04-2011 at 09:05 PM ----------



Thanks, Now if I could find a damm steering wheel witha a quick release that works with a 05 and up, I dont know crap about steering wheels.



lol alright cool that was a long time ago hahaha.....
car looks good man!!!

[Silverpoison]

Thanks for the video Greg. You guys do amazing stuff, my engine bay looks so clean now.

[99cobra09]

Nice car you got there ED, now time to enjoy it!

[Greg@RET]

http://m.youtube.com/index?desktop_uri=%2F&gl=US#/watch?v=Kh59mvixqJk

[vrt03cobra]

http://m.youtube.com/index?desktop_uri=%2F&gl=US#/watch?v=Kh59mvixqJk

This one works :D

http://youtu.be/Kh59mvixqJk

[RATFINKGT]

:drool: man thats one sick 3v

[Greg@RET]

This one works better :angel:

YouTube - ‪Silverpoison testing before track‬‏

[vrt03cobra]

This one works better :angel:

YouTube - ‪Silverpoison testing before track‬‏ (http://www.youtube.com/watch?v=Kh59mvixqJk)

How did you do that? I tried multiple times lol

[Greg@RET]

Hit alt, control, delete, then end task. Then push the big button on your computer until it turns the screen black. Let me know how it does :D

[Silverpoison]

Hit alt, control, delete, then end task. Then push the big button on your computer until it turns the screen black. Let me know how it does :D

lol I did that sig,,,:angel:

[vrt03cobra]

Hit alt, control, delete, then end task. Then push the big button on your computer until it turns the screen black. Let me know how it does :D

lol you jerk :asswave:

[Greg@RET]

YouTube - ‪Getting the tires ready for the Track‬‏

[BISKIT]

Hit alt, control, delete, then end task. Then push the big button on your computer until it turns the screen black. Let me know how it does :D

Awright, gotta amit, that is pretty funny.

[Greg@RET]

I want to know if he did it HAHAHAH Brian did you? :angel:

[t76mach]

Will it be at the Dale this Thursday?

[vrt03cobra]

I want to know if he did it HAHAHAH Brian did you? :angel:

lol no.... i would have never heard the end of that one...

[Greg@RET]

Will it be at the Dale this Thursday?

Does it say RET on it? Hahahaha

[vrt03cobra]

Does it say RET on it? Hahahaha

RET = Racing Every Thursday!!!!

[Greg@RET]

Lol, we are trying to get out there more. Hard to get out of the shop.

[vrt03cobra]

Lol, we are trying to get out there more. Hard to get out of the shop.

Tell me about it... Been so tied up I just realized the last time I took my vert out was in November of 2010 :(

[Silverpoison]

The NHRA guy is coming tomorrow at lunch to cert. the cage! Next on my to do list is get a NHRA license and some more seat time.

[RATFINKGT]

:cheers: goodluck and buy him a happy meal so he leaves happy lol

[vrt03cobra]

The NHRA guy is coming tomorrow at lunch to cert. the cage! Next on my to do list is get a NHRA license and some more seat time.

Nice, so you're going to make it out This thursday?

[Greg@RET]

Bump lol

[Silverpoison]

My car was selected as car of the month on a the most recognized s197 forum. Check it out.....

http://www.s197forum.com/forum/showthread.php?p=1060298#post1060298,

[vrt03cobra]

Nice, Congrats Ed...

[RATFINKGT]

Very nice congrats pics look sick :thumbsup:

[99cobra09]

Nice Job ED!

[32VALVR]

Looking sharp. Congrats Ed.

[Silverpoison]

Thanks guys.

[Ogbatman]

Congrates ED...:cheers:

[Silverpoison]

Mmmm........

http://i1182.photobucket.com/albums/x452/edsspeedshop/05_mustangblack.jpg

[Greg@RET]

New picture of your car:angel:

[99cobra09]

Damn ED, thats a sexi looking car!

[Ogbatman]

Need more Cowl hood.

[M.Dest.B]

so did that mach1 ever break u off :look:

[t76mach]

so did that mach1 ever break u off :look:

not even oct 29 yet :backpedal: :D

No et, grudge race you up for that silver?

[Silverpoison]

Bring it to track!

Oh yeah you cant you broke your engine off!
http://www.youtube.com/watch?v=cYph1BaUEmo

[LBFIVEOH]

Ohhh wow!!!! :angel:

[t76mach]

Oh yeah you cant you broke your engine off!
http://www.youtube.com/watch?v=cYph1BaUEmo

How mean :angry2:

Not sure yet what it is yet... I will find out manana for sure... Compression is good, spark plugs are good, injectors getting tested/cleaned.

Still no fixy then something with the engine. :angry2:

[1EVLPNY]

Bring it to track!

Oh yeah you cant you broke your engine off!
http://www.youtube.com/watch?v=cYph1BaUEmo

Wow, wtf happened?

[99cobra09]

Wow LOL!

[vrt03cobra]

Bring it to track!

Oh yeah you cant you broke your engine off!
http://www.youtube.com/watch?v=cYph1BaUEmo

SMP for the loss

[Ogbatman]

Sounds like the valves r off.

[5litrarag]

Bring it to track!

Oh yeah you cant you broke your engine off!
http://www.youtube.com/watch?v=cYph1BaUEmo

Im not a modular guy, but that shit is FOOKED.


hahahha

[BondoSHO]

Video removed :(

[Greg@RET]

If its some comfort, a car won't break from sitting. Eds car sat for about a year and a few times for a couple months here and there.

[Greg@RET]

How mean :angry2:

Not sure yet what it is yet... I will find out manana for sure... Compression is good, spark plugs are good, injectors getting tested/cleaned.

Still no fixy then something with the engine. :angry2:

So what broke? Ed is ready to race....

[t76mach]

So what broke? Ed is ready to race....


I would have to say since the car is tuned to stay in open loop and car was tuned with a full exhaust and I was running "open headers" it somehow caused it to run lean. No way for the computer to compesate since o2 are not hooked up and it stays in open loop.

When I went from the t70 .68 ar to the t70 .96 ar my car went from 14 ish idle a/f to barely running in the mornings and getting a p0300 cause it was to lean and would missfire, Retuned it and all was fine.

So since my old injectors where maxed *Idle fuel pressure was about 50psi* I am just gonna let the fabricator finish installing the pipe and install bigger injectors and retune.

[Silverpoison]

60 lbs should be enough for your app.

[t76mach]

60 lbs should be enough for your app.

I just sold my 60s lol we logged 96psi at WOT at 18lbs of boost a/f was 12.5 and injector duty cycle was 90% with the 60s...

I am gonna run in the 90 range to lower fuel pressure some and have less duty cycle and run 20lbs of boost.

[Greg@RET]

I would have to say since the car is tuned to stay in open loop and car was tuned with a full exhaust and I was running "open headers" it somehow caused it to run lean. No way for the computer to compesate since o2 are not hooked up and it stays in open loop.

When I went from the t70 .68 ar to the t70 .96 ar my car went from 14 ish idle a/f to barely running in the mornings and getting a p0300 cause it was to lean and would missfire, Retuned it and all was fine.

So since my old injectors where maxed *Idle fuel pressure was about 50psi* I am just gonna let the fabricator finish installing the pipe and install bigger injectors and retune.




If your car is tuned for open loop then you don't need any O2 sensors, it runs off the maf in open loop.

If your on gas 60's shouldn't be seeing that duty cycle and fuel pressure.

[RedRyder]

:backpedal:

Let Ed know I'll race him instead. I'll be done before Sergio at this rate. :laugh:

[t76mach]

If your car is tuned for open loop then you don't need any O2 sensors, it runs off the maf in open loop.

If your on gas 60's shouldn't be seeing that duty cycle and fuel pressure.

Yes my car doesn't use the o2s so if I change something like a simple a/r housing the ECM doesn't know to add fuel or take away like it happened before.

We kept raising the fuel pressure last time. Kept running out of injector. First we ran out of maf so we added a mafia. I run a 3" coldside tube ( I use the hpx pmas)

[Greg@RET]

Changing the ar won't change anything at idle and at wot minimal changes. In open loop the maf controls fueling. You can go from a 67 to 76 turbo and long as its the same maf and size it would need minimal changes at wot.

When I tuned fast intentions mach1 it made 930 through a 4r70w on 60# inj and ran 9.0@154 in street trim on slicks and skinnys. A bigger injector is fine, but just letting you know it will work. On Gas.

[t76mach]

Changing the ar won't change anything at idle and at wot minimal changes. In open loop the maf controls fueling. You can go from a 67 to 76 turbo and long as its the same maf and size it would need minimal changes at wot.

When I tuned fast intentions mach1 it made 930 through a 4r70w on 60# inj and ran 9.0@154 in street trim on slicks and skinnys. A bigger injector is fine, but just letting you know it will work. On Gas.

I know I never expected a simple a/r change would affect a/f we thought when I switched to a t76 with the .96 that somehow i left a vacuum line loose so we put the smoke machine no leaks nothing. Changed the tune to add more fuel and all was well.

Car was running perfect, I haven't changed anything since the last time It hit the dyno, but from a t76 to a t88. same a/r.

So since I was already running high pressure and high duty cycle with the t76 I rather not risk running out of injector and having to trailer my car back another day at the dyno.

Just having a couple of clearance problems with it lol

it will be fixed as soon as it comes back though.
http://i252.photobucket.com/albums/hh34/iggster1986/7a1ea74e.jpg

http://i252.photobucket.com/albums/hh34/iggster1986/f3674c4f.jpg

http://i252.photobucket.com/albums/hh34/iggster1986/880c6a44.jpg

[RedRyder]

:yawn:

[Silverpoison]

Stop posting pictures and run a number already.

[RedRyder]

Stop posting pictures and run a number already.

this.

[t76mach]

Stop posting pictures and run a number already.

So you are calling out a car which isn't ready? Didn't I say not till 10/29/11?

Greg asked if it was ready. I explained why it wasnt ready (even though I said it wouldn't be ready for a couple of months)

Seems to me Greg and the ret crew sure like to stir the pot. I'll just avoid you and any other questions I get in the future.

I'll be sure though to look for you at the track and the homies will have the tape rolling GUARANTEED...

[Greg@RET]

So what broke? Ed is ready to race....

That is all I asked.

[Ogbatman]

So you are calling out a car which isn't ready? Didn't I say not till 10/29/11?

Greg asked if it was ready. I explained why it wasnt ready (even though I said it wouldn't be ready for a couple of months)

Seems to me Greg and the ret crew sure like to stir the pot. I'll just avoid you and any other questions I get in the future.

I'll be sure though to look for you at the track and the homies will have the tape rolling GUARANTEED...

Oh please stop acting like a victim. All greg asked was what broke. No one else from his "crew" said anything else and Ed just wants u to stop posting pics and run the car he said nothing about racing u. He doesnt care if u run the car in fontana or mexico just run the car. :no:

[t76mach]

Really... Sure looks like a call out..


All greg asked was what broke.


So what broke?Ed is ready to race....

[Ogbatman]

Really... Sure looks like a call out..

Sorry dont see ur name in that post at all. Also seeing this is Ed's thread greg has every right to make that statment.

[M.Dest.B]

its funny how sensitive he is all of a sudden

[06silverbullet]

I know I never expected a simple a/r change would affect a/f we thought when I switched to a t76 with the .96 that somehow i left a vacuum line loose so we put the smoke machine no leaks nothing. Changed the tune to add more fuel and all was well.

Car was running perfect, I haven't changed anything since the last time It hit the dyno, but from a t76 to a t88. same a/r.

So since I was already running high pressure and high duty cycle with the t76 I rather not risk running out of injector and having to trailer my car back another day at the dyno.

Just having a couple of clearance problems with it lol

it will be fixed as soon as it comes back though.
http://i252.photobucket.com/albums/hh34/iggster1986/7a1ea74e.jpg

http://i252.photobucket.com/albums/hh34/iggster1986/f3674c4f.jpg

http://i252.photobucket.com/albums/hh34/iggster1986/880c6a44.jpg

the fastest s197 mustang is powered with a single t88 turbo vinny barber's to be exact. it runs 8.44x

[Silverpoison]

So you are calling out a car which isn't ready? Didn't I say not till 10/29/11?

I'll be sure though to look for you at the track and the homies will have the tape rolling GUARANTEED...

I will be racing at a famoso private rental, hope to see you there.

[Greg@RET]

I will be racing at a famoso private rental, hope to see you there.

I will also be racing that day.

[Silverpoison]

Lot's of cars from the RET camp will be there on that weekend..... Get ready to see some new personal best ET's..... :)

[Greg@RET]

Yep, bummer chevykiller sold his car.

[96GTS]

When is that?

[1EVLPNY]

So you are calling out a car which isn't ready? Didn't I say not till 10/29/11?

Greg asked if it was ready. I explained why it wasnt ready (even though I said it wouldn't be ready for a couple of months)

Seems to me Greg and the ret crew sure like to stir the pot. I'll just avoid you and any other questions I get in the future.

I'll be sure though to look for you at the track and the homies will have the tape rolling GUARANTEED...

http://www.treatyourskin.com/product_images/y/798/vagisil_creme___66483_zoom.jpg

[Greg@RET]

Ed you ready for Friday? Time for that 9.70....

[Silverpoison]

I'm ready.

[Greg@RET]

Never lift :D

[99cobra09]

haha lol

[Silverpoison]

Never lift :D

Yep :D

[Greg@RET]

So you ever going to race your car again? Why dont you do lic. passes on Thursday.

[Silverpoison]

LOL.... BTW License passes were done last week. ran two 6.3 back to back hot lapping.... I'm still waiting for Oct 29 for the 1/4 mile, hopefully the one calling me out shows up....

[1EVLPNY]

LOL.... BTW License passes were done last week. ran two 6.3 back to back hot lapping.... I'm still waiting for Oct 29 for the 1/4 mile, hopefully the one calling me out shows up....

I doubt he'll be ready, "something" is going to come up with the car that will prevent him from racing :jerkit:.

[Silverpoison]

Just to keep the Thread updated with he latest....

9.63@142

Eds Twin Turbo Mustang - YouTube

[vrt03cobra]

So you are calling out a car which isn't ready? Didn't I say not till 10/29/11?

I'll be sure though to look for you at the track and the homies will have the tape rolling GUARANTEED...


Just to keep the Thread updated with he latest....

9.63@142

http://www.youtube.com/user/TwinBullitt


Good Stuff Ed, Congrat's on your New PB.

Famoso 10/29/11 was fun, and good thing we had our camera's rolling to get that pass :D

[Silverpoison]

Good Stuff Ed, Congrat's on your New PB.

Famoso 10/29/11 was fun, and good thing we had our camera's rolling to get that pass :D

Yeah, it was fun! Im Thinking about going to Vegas to the Race next Week!