Ignition cylinder removal for '85 Caddy, need some help!

[LXS]

The steering wheel is telescoping, and from what I've read, I'll need a special steering wheel puller for it. Anyway, when I remove the horn cover on the wheel, there's a round metal thing that's right above the center steering wheel nut. I haven't figured out how to remove it, and haven't had any lucky in any Cadillac forums either. Hopefully someone here can help me out. Here's a few pics of what I'm dealing with so you have a better idea, thanks!

http://i195.photobucket.com/albums/z129/LXS14/5b1bbaba.jpg

http://i195.photobucket.com/albums/z129/LXS14/d0cb3cfd.jpg


The two bolts are for the lock/release lever for the telescoping column.

[Blind]

I think you need to remove those 2 bolts then use a wheel puller that pushes against the black deal in the center as you thread in 3 bolts, as you tighten the bolts the wheel will come free.

[LXS]

I can't do that until I remove the wheel nut below that round metal thing.

[Blind]

The metal bit with the tabs? The holes on it look like the same idea as how the discs on my grinder get installed

[LXS]

If I'm here at my aunt's house tomorrow, I'll take some side view pics of it. I had thought about trying to loosen the nut under the round metal tab thing, but nothing fits under it. Thought if I could loosen it, then maybe it'd pop off with the wheel puller, but it won't work.

[Killer281Saleen]

A hammer always works...