Thanks Mark!!!

[grumps91GT]

Fooking car feels awesome. And I luv the stance. Just a bit lower, but not scraping everywhere.

[RedRyder]

Sooo... tell everyone what you had done, mang. :cheers:

[Wishing4cobra]

Saw your car there when I dropped off my car.

Got almost the same mods with a little bit more :)

Needs an alignment now. Did you align your car at Marks?

[RedRyder]

Umm... did either of you happen to see a certain red fox?

[Killer281Saleen]

That junk? Yeah I piss on it.. Lol jk

[LXS]

That junk? Yeah I piss on it.. Lol jk

Yeah I seen that, too bad you ran outta piss, cause it looks like you spelled "Franco" :laugh: :look:

[grumps91GT]

Saw your car there when I dropped off my car.

Got almost the same mods with a little bit more :)

Needs an alignment now. Did you align your car at Marks?

Yes....Mark went ahead and dialed in the alignment. :cheers:

Sooo... tell everyone what you had done, mang. :cheers:

Took advatage of Mark's deal:

H&R Race springs, Bilstein HD Shocks/Struts, MM C/C plates, and MM Panhard bar.

Plus Mark had his exhaust shop custom fab some new stainless steel over-the-axle tail pipes cause my magnaflow pipes would not allow the PH bar to fit properly. I crawled underneath the car today to look at the work done and I have to say it is tits. They did a bang up job with the exhaust. I was expecting my old pipes chopped up and re-routed, but no.....brand new from scratch pipe set up. :cheers:

I take some pics tomorrow.

[RedRyder]

That's awesome about the new exhaust pipes. Mine wouldn't clear my PH bar so I went with dumps. I want my tail pipes back. :sad:

[V3NOM3S]

good to hear, now some pics.

[grumps91GT]

Yeah gonna go a dust off the car a bit, then go an take some pics. I will post some up later on.

[BISKIT]

Happy you like it Marcello.

I got to drive her back to Tujunga and it was almost like being in the Angel again, just with more power.

I <3 Marcello's Mach.

Oh and Ren, if you want tailpipes, my exhaust dude can make something for you. I agree. Your red beasty NEEDS EM.

[BondoSHO]

That exhaust guy did some awesome work. Your car is extremely nice Marcello, and now the suspension completes the package :cheers:.

[grumps91GT]

That exhaust guy did some awesome work. Your car is extremely nice Marcello, and now the suspension completes the package :cheers:.

Thanks Sean, the exhaust tips are a bit mis-aligned but Mark said he will adjust them later.

[GoofSHO]

Easy enough fix.. I was just in total awe of the artwork the exhaust guy did!! Not alot of room to work!

[BISKIT]

Thanks Sean, the exhaust tips are a bit mis-aligned but Mark said he will adjust them later.

They are misaligned due to the guide pins being different size on your magnaflow stuff, but yeah, thought it would be better to get the tip off your bumper like it was when it came in.

[grumps91GT]

Which brings me to my question: will u be open the saturday before memorial day weekend to work on my car?

[BISKIT]

Which brings me to my question: will u be open the saturday before memorial day weekend to work on my car?

Does the bear shit in the woods?

Does a shark shit in the ocean?

What do you need done boss?

[Blind]

Yes....Mark went ahead and dialed in the alignment. :cheers:



Took advatage of Mark's deal:

H&R Race springs, Bilstein HD Shocks/Struts, MM C/C plates, and MM Panhard bar.

Plus Mark had his exhaust shop custom fab some new stainless steel over-the-axle tail pipes cause my magnaflow pipes would not allow the PH bar to fit properly. I crawled underneath the car today to look at the work done and I have to say it is tits. They did a bang up job with the exhaust. I was expecting my old pipes chopped up and re-routed, but no.....brand new from scratch pipe set up. :cheers:

I take some pics tomorrow.


Do you have 4 control arms in the rear still?

get ready to start replacing the upper control arm diff mount bushings on an oil change rotation if you drive the car hard!

what lower control arms do you have? If you have good ones, now would be a good time to trade out the rear springs for MM T/A springs, pull an upper control arm, and enjoy a PM3L setup :angel:

[grumps91GT]

Yup still do, stock arms.

---------- Post added 05-19-2010 at 07:00 PM ----------

Does the bear shit in the woods?

Does a shark shit in the ocean?

What do you need done boss?

Just need the exhaust tips aligned.

[RedRyder]

get the MM LCA's next, marcello. MM says there is some bind with just a PH bar but that it's not enough to offset the benefit. i am running the MM ph bar with a 4 link and my bushings are still in pretty good shape and I drive that bitch hard.

[Blind]

get the MM LCA's next, marcello. MM says there is some bind with just a PH bar but that it's not enough to offset the benefit. i am running the MM ph bar with a 4 link and my bushings are still in pretty good shape and I drive that bitch hard.
there's so much bind that when I had the rear up but hanging and removed the 4th arm, the rear settled a solid 2"s, it was that bound up at full droop.

3 link drives so much better than a 4 bind, my upper control arm bushings looked like this after 3 months -

http://i40.photobucket.com/albums/e237/blindbatts/97gt/rear%20end/IMG_0993.jpg
http://i40.photobucket.com/albums/e237/blindbatts/97gt/rear%20end/IMG_0996.jpg

granted I probably drive the car harder than most people here, I also broke 2 stock rear swaybars on the SRA setup on my `97, and I've only put 10k miles on the car total :rofl:

[RedRyder]

oh, trust me, a torque arm will be next for me.