PDA

View Full Version : Removing Calipers


V3NOM3S
04-08-2010, 10:25 AM
Is there anything i should watch out for. I will be removing the calipers to get rebuilt. I found a place in LA that does them in a day. I can get remanufactured ones but that will take another week before they would arrive.

reivaxtorres
04-08-2010, 10:29 AM
cobra...nothing special. just dont lose the e-clip for the bolt that holds in place




edit: **nvm, i just saw the section it was posted in....lol

Blind
04-08-2010, 11:06 AM
tie the brake hose up as high as possible and cover the line with a baggy, it's a bitch to bleed out the abs system if air gets into it so let as little brake fluid drain out as possible.

006
04-08-2010, 03:23 PM
^ All info above is correct!

Killer281Saleen
04-08-2010, 03:42 PM
If you had troble doing a brake job, i will leave this to a professional.

V3NOM3S
04-08-2010, 06:39 PM
The problem was the pistons were seized in the front passanger side caliper. It is wasn't for that I would've been rolling in it already.