03 cobra heads + more FS

[reivaxtorres]

for sale, 03 cobra heads. low miles, about 57k or so if i remember correctly. come with valve covers, COP covers, all 8 COPs, fully assembled (stock). i believe these are the earlier design, NOT the ones with the updated spark plug threads.

one chamber has light nicks due to broken piston (ill gets pics up soon), its the #7 cylinder. heads were checked, valves are good, no leaks.


im looking to get $600 for them, with everything i mentioned. also have 98 cobra cams (intake and exhaust), DOHC thermostat housing, and 01 cobra fuel rail for sale.


let me know if anyone is interested or if anyone knows of anyone.


thanks
xavier

[reivaxtorres]

ok, i was originally planning on doing a 4v swap but have decided to stay 2v instead.

here is what i have for sale:


1) COMPLETE 03 Cobra heads, including: fully assembled with stock valvetrain and stock cams, valve covers, COP covers, all 8 COPs, and stock exhaust manifolds. drivers side head already has provisions for the cooling mod. taken off with about 50k miles on the car

***the #7 combustion chamber has nicks in it due to a shattered piston. valves have been checked, NO DAMAGE TO VALVES and no leakage***

***these are the early design of the heads (valve covers have 11/02 date stamped on them), NOT the redesign with the updated spark plug threads***

im looking to get $650 + shipping for the heads. i will upload pictures of them shortly, and more will be available upon request.



2) 1998 stock cobra intake and exhaust cams. bought used, i believe they are supposed to have less than 100K miles on them (70ish rings a bell, but cant be certain)

asking $100 + shipping OBO



3) an extra set of 4v COPs. 74k miles on them. $70 + shipping OBO.



4) 4v thermostat housing. used, but in good condition. dont know what this is worth, so ill say $50 + shipping. make me an offer tho.



5) 01 cobra fuel rail, 74k miles. likewise, dont know what its worth, ill put it at $50 + shipping OBO, make me an offer as well.



6) liberty 26 spline input shaft for a t56. about 20-30k miles on it, asking $150 + shipping OBO



7) MGW t5/t45 short shifter. will come with blue handle. about 5-10k miles worth of use, if that. $100 + shipping



8) 04 cobra front brakes. will come with all hardware, including brake lines. will also come with duralast C-Max Ceramic brake pads (less than 500 miles on the pads) and new Duralast rotors. $350 FIRM + shipping on these.



9) also have a BBK o/r X-pipe that im posting up for my friend. came off his 2002 GT, but i believe it should work for the 96-04 2v and 4v as well. he is asking $150 + Shipping for it.




I will get pictures of all this soon, just need to head on out to the garage to take pictures of it all. make me an offer on this stuff guys, i need it gone ASAP so i can start my 2v build.

PM me here or email me at reivaxtorres@aol.com if you have any questions.

Thanks for looking

[StriderTacticaL]

Interested, can I get pics of the brakes?

[reivaxtorres]

ill upload pictures once i get home from school tonight.

[Enorbit3]

I can vouch for this seller. Javier es buena jente.

[reivaxtorres]

here are the pics....


copied and re-posted entire post again. so far, i have interest in:
input shaft
bare heads
cobra cams
brakes
shifter.

if anything falls thru, ill post up. also, ive added the aluminum drive shaft. wil fit any v8 mustang, 94-04, so long as the correct input flange is used (the part that goes into the transmission)

here is the post again, with pics:

ok, i was originally planning on doing a 4v swap but have decided to stay 2v instead.

here is what i have for sale:


1) COMPLETE 03 Cobra heads, including: fully assembled with stock valvetrain and stock cams, valve covers, COP covers, all 8 COPs, and stock exhaust manifolds. drivers side head already has provisions for the cooling mod. taken off with about 50k miles on the car

***the #7 combustion chamber has nicks in it due to a shattered piston. valves have been checked, NO DAMAGE TO VALVES and no leakage***

***these are the early design of the heads (valve covers have 11/02 date stamped on them), NOT the redesign with the updated spark plug threads***

im looking to get $650 + shipping for the heads. i will upload pictures of them shortly, and more will be available upon request.

Pics:
http://i13.photobucket.com/albums/a267/ender03/parts%20for%20sale%20resized/100_5876.jpg
http://i13.photobucket.com/albums/a267/ender03/parts%20for%20sale%20resized/100_5864.jpg
http://i13.photobucket.com/albums/a267/ender03/parts%20for%20sale%20resized/100_5866.jpg
http://i13.photobucket.com/albums/a267/ender03/parts%20for%20sale%20resized/100_5855.jpg
http://i13.photobucket.com/albums/a267/ender03/parts%20for%20sale%20resized/100_5862.jpg

and the #7 cylinder:
http://i13.photobucket.com/albums/a267/ender03/parts%20for%20sale%20resized/100_5858.jpg
http://i13.photobucket.com/albums/a267/ender03/parts%20for%20sale%20resized/100_5861.jpg

2) 1998 stock cobra intake and exhaust cams. bought used, i believe they are supposed to have less than 100K miles on them (70ish rings a bell, but cant be certain)

asking $100 + shipping OBO


pics:
Intake:
http://i13.photobucket.com/albums/a267/ender03/parts%20for%20sale%20resized/100_5881.jpg

exhaust:
http://i13.photobucket.com/albums/a267/ender03/parts%20for%20sale%20resized/100_5880.jpg

all four:
http://i13.photobucket.com/albums/a267/ender03/parts%20for%20sale%20resized/100_5882.jpg

[reivaxtorres]

3) an extra set of 4v COPs. 74k miles on them. $70 + shipping OBO.

(forgot to take pictures of these....will do ASAP)

4) 4v thermostat housing. used, but in good condition. dont know what this is worth, so ill say $50 + shipping. make me an offer tho.

Pics:
http://i13.photobucket.com/albums/a267/ender03/parts%20for%20sale%20resized/100_5895.jpg

5) 01 cobra fuel rail, 74k miles. likewise, dont know what its worth, ill put it at $50 + shipping OBO, make me an offer as well.

Pics:
http://i13.photobucket.com/albums/a267/ender03/parts%20for%20sale%20resized/100_5901.jpg

6) liberty 26 spline input shaft for a t56. about 20-30k miles on it, asking $150 + shipping OBO

Pic:
http://i13.photobucket.com/albums/a267/ender03/parts%20for%20sale%20resized/100_5883.jpg

7) MGW t5/t45 short shifter. will come with blue handle. about 5-10k miles worth of use, if that. $100 + shipping

Pic:
http://i13.photobucket.com/albums/a267/ender03/parts%20for%20sale%20resized/100_5900.jpg

8) 04 cobra front brakes. will come with all hardware, including brake lines. will also come with duralast C-Max Ceramic brake pads (less than 500 miles on the pads) and new Duralast rotors. $350 FIRM + shipping on these.

Pics:
http://i13.photobucket.com/albums/a267/ender03/parts%20for%20sale%20resized/100_5886.jpg
http://i13.photobucket.com/albums/a267/ender03/parts%20for%20sale%20resized/100_5887.jpg
http://i13.photobucket.com/albums/a267/ender03/parts%20for%20sale%20resized/100_5889.jpg
http://i13.photobucket.com/albums/a267/ender03/parts%20for%20sale%20resized/100_5890.jpg
http://i13.photobucket.com/albums/a267/ender03/parts%20for%20sale%20resized/100_5892.jpg


This is a picture of the hardware kit, the old one. i have a new kit (NIB) that includes new caliper pins and their e-clips:
http://i13.photobucket.com/albums/a267/ender03/parts%20for%20sale%20resized/100_5891.jpg

[reivaxtorres]

9) also have a BBK o/r X-pipe that im posting up for my friend. came off his 2002 GT, but i believe it should work for the 4v as well. he is asking $150 + Shipping for it.

Pic:
http://i13.photobucket.com/albums/a267/ender03/parts%20for%20sale%20resized/100_5904.jpg

10) also have decided to offer up my aluminum driveshaft for sale too. you will need to re-use your pinion flange and rear ujoint off your current one tho, as this one has a different ujoint to fit the IRS. its a FRPP part, it has the output flange (the part that goes into the transmission) to fit a t-45 manual transmission. it will also fit the tr-3650 this way. if you want it for an automatic, it will fit, but you will need to reuse your output flange. this will fit any 94-04 V8 mustang, so long as the correct output flange is used

for the driveshaft, id like $100 + shipping for it. here are the pics:
http://i13.photobucket.com/albums/a267/ender03/parts%20for%20sale%20resized/100_5909.jpg
http://i13.photobucket.com/albums/a267/ender03/parts%20for%20sale%20resized/100_5911.jpg


I will get pictures of all this soon, just need to head on out to the garage to take pictures of it all. make me an offer on this stuff guys, i need it gone ASAP so i can start my 2v build.

PM me here or email me at reivaxtorres@aol.com if you have any questions.

Thanks for looking

[reivaxtorres]

I can vouch for this seller. Javier es buena jente.

:ani:

[StriderTacticaL]

Oh sorry I forgot the brakes had the duralast pads

[reivaxtorres]

no worries. and sorry guys, shifter is sold

[vrt03cobra]

Input shaft still for sale????

[OttoCobra]

Can U call me about these heads?

Number PM'ed

[Nicksbluestang]

**cough**Cobras are born, not built**cough**

Can you please post up pics?

[Enorbit3]

i can vouch.

[OttoCobra]

**cough**Cobras are born, not built**cough**

Can you please post up pics?

Pics are here I think....http://www.youtube.com/watch?v=oHg5SJYRHA0

[ka0tyk]

where u located?

[1EVLPNY]

where u located?

+1

Interested in the aluminum driveshaft. Would prefer to pick up.

[reivaxtorres]

Input shaft still for sale????

no, sorry, that was one of the first things that sold

where u located?

ontario. im about 2-3 minutes away from san biagios

+1

Interested in the aluminum driveshaft. Would prefer to pick up.

sorry man, it sold early yesterday morning

you cant edit old posts on here?



anyways, i have left:
03 4v heads
x pipe
4v COPs
fuel rail
4v t-stat housing

[reivaxtorres]

pictures of the heads are actually here:

http://lamustangclub.com/forums/showthread.php?p=7669&posted=1#post7669

i had listed the price on that thread as $650, and on this thread (started earlier) for $600. your guys price is $600, the $650 was for general threads i started for other boards

[Ogbatman]

**cough**Cobras are born, not built**cough**

Can you please post up pics?

Then y do they come wit build numbers...:whoknows: