Fox force!!!! [Archive] - Lost Angels Mustang Club

3K-Terminator

01-09-2010, 09:33 AM

congrats on your new fox.. .:cheers:

Sounds good... Congrats!

Thanks! There will be a lot more going into it in the near future.
Gotta get ready for Mustang Madness! :D

---------- Post added 01-09-2010 at 09:35 AM ----------

Oh and I forgot to say it has a Nitrous System. :D
But I'll be removing it and selling it soon.

Black96SVT

01-09-2010, 09:35 AM

Thanks! There will be a lot more going into it in the near future.

You don't know how right you are....

OttoCobra

01-09-2010, 09:45 AM

Looks Nice! Details......

:pouce:

Moroso CAI, GT40 Intake Mani. (Real, not off an Exlorer), O/R Mid Pipe, Flowmaster Cat-Back, Sub-Frame Connectors, C&C Plates and I think that's it.

Sounds good... Congrats!

You don't know how right you are....

Hahahaha.. certainly any foxforce ex-member knows, you will have some receipts.

But what is truly enjoyable and without cost anyway? :laugh:

grumps91GT

01-09-2010, 09:57 AM

Hahahaha.. certainly any foxforce ex-member knows, you will have some receipts.

But what is truly enjoyable and without cost anyway? :laugh:

Hardly any reciepts for me. Most was all Ebay feedback, haha!! :biggrin:

BTW, congrats Edgar.

OttoCobra

01-09-2010, 10:14 AM

Hardly any reciepts for me. Most was all Ebay feedback, haha!! :biggrin:

BTW, congrats Edgar.

I gotta admit, Edgar, you will find the foxforce community trades a lot of parts between each other. Its awesome. :partay:

3K-Terminator

01-09-2010, 10:16 AM

Hahaha thanks guys. :thumbsup:

Killer281Saleen

01-09-2010, 10:23 AM

Nice!!!!!!!

grumps91GT

01-09-2010, 10:26 AM

Yeah Jeff's right. The Fox community is large and lots of parts out there. And you have the option to go with different manufacturers for the same type of part like; heads, intake manifolds, cams, etc.

I bought most of my mods from other people and sold them to other people.

The only mods I ever bought and still have reciepts for were, FRPP F303 cam, Center Force Dual Friction Clutch, Billet Flywheel, and BBK CAI. All from Brother Performance.

The rest where form Ebay, new and used.

josea1952

01-09-2010, 10:51 AM

Cant forget the c-list

Blind

01-09-2010, 10:53 AM

looks good, congrats on the pickup!

cut coils? super low in the rear.

Krwy

01-09-2010, 10:54 AM

Nice looking coupe. A word of advice. DO NOT TOUCH IT. When I bought my coupe it was dropped with Bilstein shocks/struts, U&L control arms, and a K&N filter. Biggest mistake I did was to mod it. The car handled like a go cart, and was very fun to drive. 3 years later I'm about to fire it up and put it up for sale. If the mod bug bites, its deadly.

RedRyder

01-09-2010, 11:20 AM

Great score, Edgar! Can't wait to check it out.

LXS

01-09-2010, 11:46 AM

Congrats man, your ride looks purdy shweet!! :rockon: :cheers:

Enorbit3

01-09-2010, 11:47 AM

congrats edgar.

JustSpencer

01-09-2010, 12:31 PM

nice fox, keep the nitrous

5litrarag

01-09-2010, 01:31 PM

Nice... lose the nitrous, buy a blower.

Nicksbluestang

01-09-2010, 01:32 PM

congrats on the joining the fox force. You will need to send renryder your application to join the force. :look:

Pm me on what brand, wet/dry kit of nitrous along with a price or if you are willing to part it out.

1EVLPNY

01-09-2010, 05:14 PM

Congrats Edgar, very nice looking car. :cheers: If I were you, the first thing I'd do is a 5-lug conversion and upgrade the brakes. :D

WhiteLX

01-09-2010, 06:25 PM

need more, and better, pics.

3K-Terminator

01-09-2010, 07:16 PM

Thanks guys!
I'll post some better pictures up soon.
And nope no Nitrous for me and as for a blower, maybe. But I'm going more for an N/A set up.

5litrarag

01-09-2010, 08:04 PM

Thanks guys!
I'll post some better pictures up soon.
And nope no Nitrous for me and as for a blower, maybe. But I'm going more for an N/A set up.

Then buy a short block and build a high compression stroker....

1EVLPNY

01-09-2010, 08:11 PM

Then buy a short block and build a high compression stroker....

:nod:

high comp n/a pushrod= :drool:

3K-Terminator

01-09-2010, 08:17 PM

Then buy a short block and build a high compression stroker....

:nod:

high comp n/a pushrod= :drool:

That sounds nice. But we will see.

OttoCobra

01-09-2010, 08:22 PM

I'd love to see where and what you are starting with.

When the pics are up, lets see. :tup:

3K-Terminator

01-09-2010, 08:33 PM

I'll be at the Racer Meet at Ben Alamedas tomorrow with the Fox so you guys can take a look at it if you'd like.

Krwy

01-09-2010, 09:40 PM

Your best bet is to have the same setup I did on my '93 LX. If you want to start modding go this route. Easy, straight-forward, cheap, and reliable.

GT40 heads, Explorer intake, stock cam 1.7 rockers Paxton NOVI1000 supercharger. Will make 400hp to the wheels all day long and be extremly reliable. Not only that, pop the hood, SMOG LEGAL.

5litrarag

01-09-2010, 11:31 PM

That sounds nice. But we will see.

You seem like you want to make better than average power w/o a blower so I'm telling you the short cut to doing that.
When I say shortcut I mean its shorter than adding heads and a cam to what you have, tuning it and then finding that 300-315 rwhp is just not enough for what you want. But then again, maybe it would be....

RedRyder

01-09-2010, 11:42 PM

Seen it! Sweet coupe with a REAL gt40 intake.

Blanco32v

01-10-2010, 03:39 AM

do it right the first time. LSx swap and be done....:steve:

RedRyder

01-10-2010, 09:42 AM

Lol, whatever.

5litrarag

01-10-2010, 09:44 AM

Then he really should add a blower... those old tubular intakes made good power with them. But if he decided to sell the intake to go with something else more fitting to a stroker, he could make some decent coin from it.

Nicksbluestang

01-10-2010, 10:14 AM

do it right the first time. LSx swap and be done....:steve:

Screw you!. I was about to post the same thing but found out you posted it before i did.
Blanco - 1
Nick - 0

Sal

01-10-2010, 07:59 PM

http://i291.photobucket.com/albums/ll293/saugusmailman/Ben%20Alameda%20Performance%20Racing%20GTG/DSC_4747-1.jpg
http://i291.photobucket.com/albums/ll293/saugusmailman/Ben%20Alameda%20Performance%20Racing%20GTG/DSC_4750-1.jpg
http://i291.photobucket.com/albums/ll293/saugusmailman/Ben%20Alameda%20Performance%20Racing%20GTG/DSC_4751-1.jpg
http://i291.photobucket.com/albums/ll293/saugusmailman/Ben%20Alameda%20Performance%20Racing%20GTG/DSC_4752-1.jpg
http://i291.photobucket.com/albums/ll293/saugusmailman/Ben%20Alameda%20Performance%20Racing%20GTG/DSC_4754-1.jpg
http://i291.photobucket.com/albums/ll293/saugusmailman/Ben%20Alameda%20Performance%20Racing%20GTG/DSC_4755-1.jpg
http://i291.photobucket.com/albums/ll293/saugusmailman/Ben%20Alameda%20Performance%20Racing%20GTG/DSC_4756-1.jpg
http://i291.photobucket.com/albums/ll293/saugusmailman/Ben%20Alameda%20Performance%20Racing%20GTG/DSC_4757.jpg
http://i291.photobucket.com/albums/ll293/saugusmailman/Ben%20Alameda%20Performance%20Racing%20GTG/DSC_4758.jpg

3K-Terminator

01-10-2010, 08:05 PM

Thanks for the pictures Sal and Jose!
They look sweet!

grumps91GT

01-10-2010, 08:07 PM

Looks good......nice find.

LXS

01-10-2010, 08:07 PM

Man your ride looks soo damn sweet!!! I'm getting jealous!! :sad: :laugh: :cheers: :D

Enorbit3

01-10-2010, 08:08 PM

sweet...so does that notch already have a gt40 intake??

grumps91GT

01-10-2010, 08:09 PM

yup

3K-Terminator

01-10-2010, 08:16 PM

Yup it has a GT40.

5litrarag

01-10-2010, 08:41 PM

Good find man... first thing, I say get under that hood with a brush, some water and a bottle of Super clean. Then headlights....

Eddie

01-10-2010, 08:47 PM

It is a nice ride bro....glad you found what you were looking for and that your happy with your find. Now lets go racin!!!!

OttoCobra

01-10-2010, 08:49 PM

I might be able to polish those Ford lights out for you mang. And, I gotta say.....

Damn that is a clean looking notch! Wow.
(That cowl hood makes it) :drool:

3K-Terminator

01-10-2010, 08:55 PM

Good find man... first thing, I say get under that hood with a brush, some water and a bottle of Super clean. Then headlights....

Yup I cleaned all the under carriage on Saturday, and I'll be cleaning under the hood tomorrow.

It is a nice ride bro....glad you found what you were looking for and that your happy with your find. Now lets go racin!!!!

Thanks Eddie! All I need is some new tires, new shifter and I'm good to go race this baby!

might be able to polish those Ford lights out for you mang. And, I gotta say.....

Damn that is a clean looking notch! Wow.
(That cowl hood makes it) :drool:

Thanks for the compliment! And I gotta replace the headlights and side markers cause most of them are cracked.

OttoCobra

01-10-2010, 09:01 PM

Yup I cleaned all the under carriage on Saturday, and I'll be cleaning under the hood tomorrow.

Thanks Eddie! All I need is some new tires, new shifter and I'm good to go race this baby!

Thanks for the compliment! And I gotta replace the headlights and side markers cause most of them are cracked.

cracks, no bueno.
LRS will set you up for around one Benjamin. This car neeeeds them. :tup:

3K-Terminator

01-10-2010, 09:04 PM

cracks, no bueno.
LRS will set you up for around one Benjamin. This car neeeeds them. :tup:

I'm gonna go with the OEM lights. :D

OttoCobra

01-10-2010, 09:10 PM

I'm gonna go with the OEM lights. :D

Most of the retailers like LRS and others advertise a "Ford headlamp kit" and then, they only include the the actual "Ford left & right headlamp" in the kit. DON'T FALL FOR THAT!

-Get the Ford marker lights specifically. Otherwise you'll get Perfect Ford headlamps, and some Chinese crap and be really pissed! :mad3:

3K-Terminator

01-10-2010, 09:18 PM

Most of the retailers like LRS and others advertise a "Ford headlamp kit" and then, they only include the the actual "Ford left & right headlamp" in the kit. DON'T FALL FOR THAT!

-Get the Ford marker lights specifically. Otherwise you'll get Perfect Ford headlamps, and some Chinese crap and be really pissed! :mad3:

Oh yea I'm gonna go to a Ford dealer and order them. :D

vtec wht

01-10-2010, 10:15 PM

So you ended up getting it huh! congrats man! No Lie that car was always fun to run with on the freeway! To be continued in the canyons ;)

3K-Terminator

01-10-2010, 11:09 PM

So you ended up getting it huh! congrats man! No Lie that car was always fun to run with on the freeway! To be continued in the canyons ;)

Yup I got it. Loving it more every day. :D

Krwy

01-10-2010, 11:28 PM

Car looks good. LEAVE IT ALONE! Keep it nice and simple.

96GTS

01-10-2010, 11:43 PM

Looks good. Any plans to replace the heater core anytime soon??

WhiteLX

01-11-2010, 12:33 AM

Looks good. Any plans to replace the heater core anytime soon??
pfft, who needs a heater. :p

JustSpencer

01-11-2010, 12:36 AM

somebody should buy my real tubular intake
http://sfbay.craigslist.org/eby/cto/1542726869.html

LXS

01-11-2010, 12:52 AM

somebody should buy my real tubular intake
http://sfbay.craigslist.org/eby/cto/1542726869.html

How much do you want for the beat tv deck, lower nitacke, and 145 amp alter nayter? I haz kasche n hnd! :nod: :bling:

JustSpencer

01-11-2010, 01:02 AM

well then all come off of my cuz's gynuine hiway trooper car so $1200 sound fair

LXS

01-11-2010, 01:06 AM

Seld! Yuo haz deel! :woot: :enorbit3:

3K-Terminator

01-11-2010, 08:50 AM

Car looks good. LEAVE IT ALONE! Keep it nice and simple.

Suck a nut.

OttoCobra

01-11-2010, 11:06 AM

Suck a nut.

It's your car, stick with your plans, and know there are people that like what you have right now.

Kameleongt

01-11-2010, 11:57 AM

great hu-whip, I hope to get me a fox this year :) if I can only sell my 98gt.

RedRyder

01-11-2010, 01:21 PM

Edgar, if u want to delete the center console armrest, I have a black delete panel.

Leos06gtLL

01-11-2010, 01:53 PM

great starting point was better than mine on my svo

Your best bet is to have the same setup I did on my '93 LX. If you want to start modding go this route. Easy, straight-forward, cheap, and reliable.

GT40 heads, Explorer intake, stock cam 1.7 rockers Paxton NOVI1000 supercharger. Will make 400hp to the wheels all day long and be extremly reliable. Not only that, pop the hood, SMOG LEGAL.

I like your thinking

3K-Terminator

01-11-2010, 09:05 PM

Edgar, if u want to delete the center console armrest, I have a black delete panel.

Hmm that doesn't sound like a bad idea since the button to open it is broken.
How much?

---------- Post added 01-11-2010 at 09:06 PM ----------

great hu-whip, I hope to get me a fox this year :) if I can only sell my 98gt.

:doit:

RedRyder

01-11-2010, 10:29 PM

Fo free, mang. Consider it a welcomr to the force gift.

3K-Terminator

01-11-2010, 10:34 PM

Fo free, mang. Consider it a welcomr to the force gift.

Sweet! Thanks Ren! Let me know when I can go pick that up or if you wanna take it to Sal's this Sunday. And thanks again! :thumbsup:

RedRyder

01-11-2010, 10:36 PM

No problem. :cheers:

Eddie

01-12-2010, 02:23 PM

Sweet! Thanks Ren! Let me know when I can go pick that up or if you wanna take it to Sal's this Sunday. And thanks again! :thumbsup:

Edgar,

If you get a minute..can you send me the pics you took last night?...Thanks,

3K-Terminator

01-12-2010, 02:40 PM

Edgar,

If you get a minute..can you send me the pics you took last night?...Thanks,

Fo' sho', I was just uploading them to my photobucket. :cheers:

OttoCobra

01-12-2010, 10:23 PM

Edgar,

If you get a minute..can you send me the pics you took last night?...Thanks,
Fo' sho', I was just uploading them to my photobucket. :cheers:

Moar pics of the fox ?? COOL ! :partay:

Dayum interwebs hanging up. :mad3:

DBBL posts are a PITA !! :ugh:

FOXnSTANGER

01-12-2010, 11:29 PM

Man your ride looks soo damn sweet!!! I'm getting jealous!! :sad: :laugh: :cheers: :D

X2. i want to find one like this...

3K-Terminator

01-13-2010, 07:15 AM

Moar pics of the fox ??

COOL ! :partay:

http://www.threadbombing.com/data/media/52/moar_cat2.jpg

Oh no they're of someone elses fox.
Sorry.

X2. i want to find one like this...

Thanks! :cheers:

Eddie

01-13-2010, 01:04 PM

I'm gonna go with the OEM lights. :D

OEM huh?? The force is srtong with you!!

WhiteLX

01-13-2010, 01:23 PM

I used OEM headlights, but aftermarket inners and clear corners. They look great.

3K-Terminator

01-13-2010, 04:35 PM

OEM huh?? The force is srtong with you!!
Haha. Gotta go with the OEM Eddie! That's why my Fox looks like it's blind from one eye, the one that's eaten up by the sun is an aftermarket one. And the one that looks good is an OEM one.

I used OEM headlights, but aftermarket inners and clear corners. They look great.

Hmmm....

Blind

01-13-2010, 04:55 PM

I used OEM headlights, but aftermarket inners and clear corners. They look great.

same, mine are about 2 years old now. OE Ford headlights, aftermarket inners and outers, got the set from 50resto.com

bumper cover on the other hand has been fucked up out on the track, not much paint left haha.

http://i40.photobucket.com/albums/e237/blindbatts/mustang/motor/IMG_1421.jpg

nothing is tightened down or aligned in that pic, I had just spent a day cutting apart the inner structure of the bumper cover to fit the intercooler.

RedRyder

01-13-2010, 06:23 PM

I kinda like the ultraclear fox lights without the fluting.

Blind

01-13-2010, 06:29 PM

Wow, Looking goood!
I can't wait to see your intercooler mounted up in that space!
look closer, it is up in there :) I meant more along the lines of the lights aren't aligned/tightened up.

3K-Terminator

01-13-2010, 06:44 PM

look closer, it is up in there :) I meant more along the lines of the lights aren't aligned/tightened up.

Sweet, you can't even see it. Good job. :thumbsup:

FOXnSTANGER

01-14-2010, 09:32 PM

I used OEM headlights, but aftermarket inners and clear corners. They look great.

smoked IMO looks really good too. I have them on my white LX and SSP.:banana2:

50resto will probably be cheaper than the stealership. the only thing i have gotten there is the catback rubber holder things because they had to be new.

Krwy

01-14-2010, 10:41 PM

What an intercooler should look like behind a fox bumper
http://img.photobucket.com/albums/v209/Krwy/noname-3.jpg

OttoCobra

01-14-2010, 10:43 PM

same, mine are about 2 years old now. OE Ford headlights, aftermarket inners and outers, got the set from 50resto.com

bumper cover on the other hand has been fucked up out on the track, not much paint left haha.

nothing is tightened down or aligned in that pic, I had just spent a day cutting apart the inner structure of the bumper cover to fit the intercooler.

Wow, Looking goood!
I can't wait to see your intercooler mounted up in that space!

look closer, it is up in there :) I meant more along the lines of the lights aren't aligned/tightened up.

That is stealth... hides completely. :D

smoked IMO looks really good too. I have them on my white LX and SSP.:banana2:

50resto will probably be cheaper than the stealership. the only thing i have gotten there is the catback rubber holder things because they had to be new.

It is hard to beat 50resto on some of this fox stuff.

I've tried, it is tough.:tup:

What an intercooler should look like behind a fox bumper
http://img.photobucket.com/albums/v209/Krwy/noname-3.jpg

Yup, yup!

I like it. ;)

RedRyder

01-14-2010, 11:09 PM

nothing beats the dual intercooler setup by procharger. keeps you from having to cut up your LX bumper cover. I'll see if I can find some pics.

3K-Terminator

01-19-2010, 03:28 PM

:dead:

Nicksbluestang

01-19-2010, 04:31 PM

:dead:
Does it not start?
did you crash it or what? Why the "dead" smiley

3K-Terminator

01-19-2010, 04:39 PM

Does it not start?
did you crash it or what? Why the "dead" smiley

Hahaha, hell no homeboy I know how to drive and my Fox starts every time.
The dead smiley was for the thread, cause no one has posted on it for a while and I was bored so I put the dead smiley. :aaron:

grumps91GT

01-19-2010, 06:09 PM

Its a Fox thread.....what do you expect? :laugh:

3K-Terminator

01-19-2010, 06:19 PM

Its a Fox thread.....what do you expect? :laugh:

You suck a nut too.

grumps91GT

01-19-2010, 06:22 PM

You suck a nut too.

Cant do there son....too busy sucking on some girl's tig-ole-bittays!! :asswave:

On a side note, cant wait til Ren starts his racing season. :fredo:

3K-Terminator

01-19-2010, 06:51 PM

Cant do there son....too busy sucking on some girl's tig-ole-bittays!! :asswave:

On a side note, cant wait til Ren starts his racing season. :fredo:

"Sharing is caring, it can be fun!" :laugh:

Hell yea, I'll be right there with him. :D

OttoCobra

01-19-2010, 07:16 PM

"Sharing is caring, it can be fun!" :laugh:

Hell yea, I'll be right there with him. :D

Sharing your nuts ... ? :confused:
-LOL-!

I'm hoping I can get the trans fortified in the Ottocobra for some strip action coming this spring! :burnout:

3K-Terminator

01-19-2010, 07:32 PM

Sharing your nuts ... ? :confused:
-LOL-!

I'm hoping I can get the trans fortified in the Ottocobra for some strip action coming this spring! :burnout:

Hahaha, no not my nuts foo.
He said he was sucking on some tig-ole-bittays. And I said "Sharing is caring, it can be fun!".
You mean your Fox?

OttoCobra

01-19-2010, 08:20 PM

Hahaha, no not my nuts foo.
He said he was sucking on some tig-ole-bittays. And I said "Sharing is caring, it can be fun!".
You mean your Fox?

(bewbies) Woot... !

Fortified 4R70W trans is for the cobra motored car I have.... :burnout:

3K-Terminator

01-19-2010, 09:19 PM

(bewbies) Woot... !

Fortified 4R70W trans is for the cobra motored car I have.... :burnout:

What year Cobra motor?
Aren't you restoring a Fox?

3K-Terminator

01-20-2010, 09:45 AM

The Ottocobra project is complete... for now. It's all based of an aluminum Teksid block '01 Cobra Engine topped with an 03/04 Stage 4 Stegm.ported Eaton

LIST of Mods in sig: Full Maximum Motorsports suspension, 31spline Eaton posi, 3.73 gears, JLT, Motorsport Shortys- BassanniXpipe and MagnaFlows, Mezzeire, Brembo 4 piston '00Cobra R Brakes, HID's, Carbon fiber '03 Cobra hood, 18's, and 4R70W behind 4.6 COBRA MOTOR/Stegm.ported Eaton- started it's life as a 2002 V6
I'm currently re-investigating the transmission fortification that I wanted to do the first time around. Elimination of the weakest link in the drivetrain presently.

As for the 88FoxGT ..? If the weather co-operates, I may have this done for the weekend!

I wanna see that Fox!
That red color you painted it is sweet and I don't like red.
Are you keeping it or selling it?

OttoCobra

01-20-2010, 11:16 AM

The Ottocobra project is complete... for now. It's all based of an aluminum Teksid block '01 Cobra Engine topped with an 03/04 Stage 4 Stegm.ported Eaton

LIST of Mods in sig: Full Maximum Motorsports suspension, 31spline Eaton posi, 3.73 gears, JLT, Motorsport Shortys- BassanniXpipe and MagnaFlows, Mezzeire, Brembo 4 piston '00Cobra R Brakes, HID's, Carbon fiber '03 Cobra hood, 18's, and 4R70W behind 4.6 COBRA MOTOR/Stegm.ported Eaton- started it's life as a 2002 V6
I'm currently re-investigating the transmission fortification that I wanted to do the first time around. Elimination of the weakest link in the drivetrain presently.

As for the 88FoxGT ..? If the weather co-operates, I may have this done for the weekend!

When you see it, you'll understand how hard to let go of it is for me.

---Argh, I guess I'm not "keeping it."