PDA

View Full Version : Hellraiser Shelby Over 800rwhp!

Greg@RET
11-23-2009, 12:37 PM
100% stock motor, first video is on 100 octane 22# of total boost (8# off blower), 80# fuel inj. triple return fuel system. Second vid is 91 octane.

http://www.youtube.com/watch?v=DJHjC1lvJkY

http://www.youtube.com/watch?v=FjaDdgUM6CI
Enorbit3
11-23-2009, 12:47 PM
is that sonics gt500?
Martini
11-23-2009, 12:51 PM
Prediction:

Greg will get a call from jaime for a parts list
Mark will get a call for a quote
Jaime will finally start picking on other blown cars.
BISKIT
11-23-2009, 01:08 PM
Prediction:

Greg will get a call from jaime for a parts list
Mark will get a call for a quote
Jaime will cry when he finds out that there is not another pound of boost that Mark or Greg will run on his car without a built bottom end.


Fix.t that for ya.
Greg@RET
11-23-2009, 01:25 PM
Hhahahahah...

BTW I dont sell parts... all labor.
BondoSHO
11-23-2009, 01:39 PM
Hey look, a real Shelby :steve:
vtec wht
11-23-2009, 07:23 PM
pure sex!
Nicksbluestang
11-23-2009, 09:00 PM
Real Shelby's making real power FTW.

Thats :drool:tastic
06silverbullet
11-24-2009, 11:51 AM
me like
1218shelby
11-24-2009, 08:33 PM
Shelby's FTW..
1218shelby
11-24-2009, 10:16 PM
Fix.t that for ya.



so quote on a built bottom end? Novi2200SL is good for 900hp.. :look:


http://www.paxtonauto.com/product.php?id=139
OttoCobra
11-25-2009, 12:22 AM
Shelby's FTW..

I'd like one in silver. :D
Daddy's GT500
11-25-2009, 09:53 AM
Greg Question

Is it worth me running a 100 oct. tune, and if I do, do I have to use different plugs??
Greg@RET
11-25-2009, 12:18 PM
Not really Jeff, it will pick up but not much. Get the blower ported or throw a lower crank pulley on it.
BISKIT
11-25-2009, 12:56 PM
so quote on a built bottom end? Novi2200SL is good for 900hp.. :look:


http://www.paxtonauto.com/product.php?id=139

You would be running that blower on the ragged edge. That and I can count on a couple of fingers how many LAMC folk I would trust with a 900 hp car.
5litrarag
11-25-2009, 01:58 PM
900 hp street car? the car or its driver would be smashed up within 2 months....
Martini
11-25-2009, 02:03 PM
why dont you just save the trouble and give Jaime a dyno sheet that says 900hp, save Jaime money, you all trouble, and possibly jaimes life.
YOUNGIN
11-29-2009, 01:13 AM
^lol..

fuck.. i would punch a baby for that car..
RATFINKGT
11-29-2009, 12:12 PM
Psssh ill punch a baby fetus for that n still slap the mother for that car
BISKIT
11-29-2009, 02:20 PM
900 hp street car? the car or its driver would be smashed up within 2 months....

No such thing homey.
Greg@RET
11-30-2009, 01:06 PM
I will let people know personally I think the kit sits way to low. He has ripped a couple pipes off twice now, and also ripped the oil line for the turbos. Not a good idea for a lowered car. Also it would be nice if all the end of the pipes were rolled. That way the clamps have something to hold on to.... The throttle body pipe has blown off twice now :aaron: It is fast.... lol
BISKIT
11-30-2009, 01:52 PM
I will let people know personally I think the kit sits way to low. He has ripped a couple pipes off twice now, and also ripped the oil line for the turbos. Not a good idea for a lowered car. Also it would be nice if all the end of the pipes were rolled. That way the clamps have something to hold on to.... The throttle body pipe has blown off twice now :aaron: It is fast.... lol

Similar issues here in the beginning with STS. The only thing that touches down is the pipe that goes along the rockers on either side (cold side) but never an issue with oil lines as they are well tucked on both feed and return.

The worst I ever had was one of the silicone couplers on the cold side ripping but no big deal, just lost boost till replaced. I had an issue with the silicone coupler coming off the throttle body but some minor re-engineering and never had that problem again.